Type: Posts; User: Velineon
So if I understand it right, the voltage is always maximum and the amps are various.
This means "kV x V = rpm" only works for maximum rpm?
Say I use 2x 3S LiPo, so 22.2V together.
Does the motor always use the 22.2V or not?
According to this equation it's not the case:
kV x V = rpm
Is this true though or does the motor always...
Thanks for the help guys!
I will just move along. ;)
Amps x volt = watt...
I have a few questions, so I will number them.
If you have a 500W motor (as an example) and you use a 2S 5000mAh 25C LiPo.
This LiPo will give 5A x 25C x 7,4V = 925W
Here you go: http://prolineracing.com/bodies/ford-f-150-svt-raptor-clear-body-mt
Why not just buy the Proline F150 Raptor body?
I fits much nicer...
Thanks for the tip!
I will check the site of JConcepts out if they have nice bodies!
I think only the ESC has changed, but not 100% sure...
Haven't used my ERBE yet... :(
Waiting for the spring to drive again.
So I haven't tried it yet, still in the packaging.
Thanks for sharing that video!
It seems like the front is the same height, but as you said the rear is a lot lower with the wing.
What drove nicer in your opinion? Did you like the back high or low?
What rims did you do?
Did you do the following things?
- Clean the rim before it?
- Apply a big enough amount of EasyOff?
- Wait for a while?
- Repeat the process two or three times (if needed)?
Thanks for the help! :)
Not sure, because I ask this for a friend...
He was wondering how big the tray is and he knew I already have an account here.
It will be a 2S, but what's the most mAh that usually fits without the...
Nice to know! :)
I am going to do it tomorrow myself.
Does anyone know this?
:lol: His username looks familiar by the way....
I am making mine all black with some dark blue. :cool:
Same here, they are half chrome and half black, due to all the damage...
Looks nicer just all black I think.
Indeed sir! :p
Even now I know it probably won't damage the tire, I don't want too much oven cleaner on them...
Hope it works out well, because I want to do the bumpers too.
Alright, so I should be fine...
I will give it a go, but I will cover the tires up. ;)
No, that's why I ask.
I taped my tires and put them back on, but forgot to unchrome the rims... :(
Maybe if I put sime tape on the tire and then put the oven cleaner on the rim?
I was wondering if oven cleaner can damage the tires...
If you but the MMM system of the ERBE it will have two connectors, so you will be able to just connect two LiPo's.