Type: Posts; User: batman11
i had the hr knuckles and after awhile they wore funny on the pivot ball.
i would try rpm they make good stuff
castle has a new one out, just like the one for monster
i really want some of those shock guards for my slash.
if anyone knows the part # please let me know:D
yes .8 mod is compatible with 32
try to dremel a slot in the head of the bolt and use a flathead screwdriver
dont you just hate that when you get something the a week later that same thing comes with more or better stuff. when i got my mini revo 2 weeks later they come with 2.4ghz :( and now the ultimate...
check all connections with it on, wiggle them all in different spots
then reprogram everything from the begging including controller trim and end points. make sure you have fresh batteries in car...
thats kind of a small battery, you should try 4000mah-8000mah
i'm gettin about 25 min off a 2s 5000mah and your battery is half that size
no probs with my robinson
castle aluminum shot
thats only .5 mm. shouldnt lock up the rear
you might have to check the rear diff input gear
these are also on the wheel axle on the bearings
they fit the king pins for the front c hub removed some slop on the aluminium
here it ishttp://i869.photobucket.com/albums/ab254/b_atman11/slashdiffinstructions.jpg
photbucket shrinks the scan down, if anybody wants the full pic let me know
ok let me dig up the sheet and scan it for you
its a 5x8x.05
dont think anybody has had to pay, unless its blatant abuse or neglect.
if there is a charge, credit card or check should work.
did you install the teflon washer between center diff and rear diff?
tried the 40c venom, it rocks plus you can charge up to 3c, have not tried the 8000 though. i can say that my next lipo is the 40c 5000mah
just send it in with description of what happened. i sent mine in it only took like a week , thats from when i shipped it out to the day it arrived on my doorstep. i did not have a receipt either and...
i think this is what you sawhttp://i869.photobucket.com/albums/ab254/b_atman11/1_921b5fc7ed65bc6ead651c78dfb391fd.jpg
you can get it with 2 or 1 or none.
there are 2 10x5x.05 teflon washers in the diff, and one 8x5x.05 that goes on the rear out put.
are you using the teflon washer 5x8x.05 ( between center diff and rear ) ?
this washer is only shown in the directions that came with the diff, they are not in the regular manual.
i order mine from my lhs luckly they were placing an order with them.
kingdomracer do those spur gears change the sound of your slash?
those are metal?
so far no complaints here,no leaks
just got mine
stock diff cover screws are to long and needed to be ground down 2-3 threads
other than that smooth buttery diff action, spur gear nice tight fit.
havent put in the truck yet
it went so fast he missed it