Type: Posts; User: kgombe1
yes if you look through the exhaust of your Rc engine with the piston at BDC you will see the intake port.. so yes they are open at the same time, its how the burnt gas is expelled and fresh gas let...
lol... did you find it this time? i dunno what to tell you.. lol
hmnnn. search for RB Mods?
yes it is...
RBmods is designing his own piston and sleeve for the revo with a turbo head.. its going to be a 5 port sleeve.. it will have a different rod and bearings and run a 2 piece turbo head..
works amazingly good..
you don't need half offset for the revo.. Although it is nice to have.. Standard offset works just fine with some set up changes..
manufacturers don't make 1.2 offset rims anymore
Yes it does... It will fit any small block
man i have a whole bunch i will have to sift through.. but yes that one with the setup i posted
doing good PNT.. just enjoying to great white north, 96motorhead if you search the picture thread you will find lots of mine.. and PNT's
ahhhh the good ole days..
looks like we had the same radio as well..
here you go
along with the dual chamber traxxas jato pipe
back in the day, my setup
its a very good chassis, just make sure you have the the brace on it between the 2 tabs, one holds the tank and the other the receiver box
go with a stronger servo and use the heavier servo saver spring...
the weaker servos don't turn the wheels full throw at a stand still with rubber on the ground, only when the car is rolling...
or idle is to high
left the truck off the ground and try it... and look at the rotation of the wheels.. chances are you put a diff in upside down ( if yo took the diffs out of course)
you said the pull start wouldn't retract and you had to turn the engine to get it to retract.. all I'm saying is that the engine being stuck .. (this is because of metal pinch) should not be...
Engine being to cold or flooded wouldn't affect the pull start from retracting.... it would affect it from starting..
in the numbers of screws dimensions 3 x12 means a 3mm thread diameter not the size of the hex that fits it.. so it can be a 3mm screw with a 2.5 hex or even a 2mm hex..
you would want to invest in...
those screws are 3x10.. he's saying 2.5 screws..
that should not affect the retracting of the pull start though.. Peterson70 gave a good suggestion.. for future reference
can rem. the revo using 2.5 screws... but its a long time since i worked on one
lol.. thanks man
just something different and yellow is my colour