Type: Posts; User: tmaxx254me
I am running the proline bead locks on a 5200Mah 2s 25c where I race. I have had no issues with the tire coming out of the rim.
I did cut a tire on a nail and your right, five minutes and six...
I'm running the 4600 MM. I had to pinion down to 11. Integy heatsink/fan, temp stays in the 150 range. Even with the 11 my truck is plenty fast for our tight track
Using 5200Mah 2s 25c lipo
you can buy a Y harness at any LHS
I have one of those on my MM 4600kv, it dropped my temps 30 degrees, but the fan did not last long. I replaced it with a novak fan and have had no other problems.
I was numbers 102 and 103 (post #93)and two was not good enough, had to add another one. so that makes this one #210
I said upwards of 70, some of the bidding has gone there.
I have seen them hanging around the 35-50 dollar range also, just having a hard time paying that, plus shipping.
I just checked buytraxxas.com....swaybarkit 6898 is out of stock
I do not want to pay upwards of 70 dollars for a diff that will sell for about 35-40 dollars when it does come out....I'll wait.
Traxxas.....PLEASE.....PLEASE......When will center diffs, swaybar kits and all other parts be available for us? :wub:
If you used the stock foams you will still get side bite, the foam is a bit soft. You may have to trim the outter set of knobs or at least every other(like I did) and I also put in the the proline...
101 + my 2 = 103
My son and I have had NO breakage. Running 5200 Mh 2s 25c lipo w/ 1/10 scale MM 4600 kv.
Love this truck...and our 2wd's
the way I understand, they are except you will have to drill holes to mount the sway bars if you are using those
I am by no means complaining about anything...mearly asking if anybody from Traxxas knows when the center diff and swaybars in general would be available to the public. That's all
Ok in my simple mind this worked last time I posted this question about the release of the slash(Thank you Traxxas for a great truck!)
Now here is my new question.....
When will parts be...
So will the accessories (center diff) be released at the same time?
or a parts breakdown?
I guess it WORKED!!!
Thank you Traxxas!!
See all you have to be is nice and ask :-P
yes, rear wheels from 2wd slash will be the proper offset for all four wheels on the 4x4 slash (both have the same hex size)
I have tires(j concepts goosebumbs), mm 4600 kv motor/esc, 5200mah 20c 6 cell lipo battery, body (j concepts truth, not painted yet).
Just missing one MAJOR piece...the truck!
PLEASE, PLEASE, PLEASE RELEASE THIS TRUCK!!
Or at least give those of us waiting a Date to look foward to.
Heard today date was pushed back to end of December...true/false?
Somebody from Corp....
I pre-ordered one from that site....I already have, tires, wheels, Mamba max,servos, rx, tx, and several bodies.....for 204.18 I will be racing my Slash 4x4
I have a 1/10 scale Mamba Max 4600kv to put in it......look out below cause here we go!! :p
I put the center diff in my nitro Revo 2.5 when I was racing it. It made a difference on transfering power between the front and rear, so with that theory it should do the same with an electric...
I was looking on the website (traxxas) and in the accessories it shows a center diff.
I've looked at every pic I could get my eyes on and none of them show it on.
Looking at the pics I don't see...
The airing it out pic is my son Eric's truck aiming for the clouds. ;-)
on another forum, they were talking about the pep boys in Florida doing the same thing, but they said nothing about part sales.