Type: Posts; User: jake1234
works great, dont run the fan in the winter.
fan mod for overtray
i run a controller from rc-lights that control the lights/breaks/turn signals. The turn signals are actually annoying because who drives in a straight line while bashing?
If i dont want to run...
where are your pictures?
yes tbone or rpm, both are great at saving your a-arms for when you forget to stop before hitting a curb or tree or something else that is stationary
nice find, now get a new front bumper and get it dirty again
i dont use body pins, i use velcro to attach my body. Because of this, i needed full velcro to hold the overtray and the overtray holds the body. If i take off the overtray, then there is...
i like your idea of venting out the back like an exhaust. If i get bored over the winter i may have to mod my design to do that. I just cut holes in the cover to vent out.
am using a 11.1v 800mah lipo. Reason? 11.1v is as close as i could get to 12v using a cheap/reliable rechargeable battery, and 800mah lasts forever just running a pc fan. i am using a vantec...
i have the protrac kit, and it make the truck flip less, but so does better driving.
must have upgrades
1- king headz motor mount
2- lipo battery
3- front bumper rmp or tbone
4- some say...
for street use either proline street fighters (i have these, but they have too much grip so you have to be careful or you roll it)
or jconcepts g-locs
i had this problem when i changed to all metal spur/pinion. Slipper was too loose and it didnt wheelie. Soon as i tightened it, wheelies all the time now
get either the RPM or the tbone, both are great.
I have the RPM
yes the fan is very loud but very effective. Hopefully i get my temp sensors soon so i can do some tests blowing in vs blowing air out vs. no air at all.
here is a picture of the tbone back bumper and wheelie bar
shipping from tbone isnt super fast or super slow
servo guards are one of those things that arent really needed, but i like mine because of where i bash
RC-Lights 5090, plenty of 30% off coupons floating around
stock ones are $3, i've yet to break mine. if you keep breaking them upgrade. It all depends how you drive, what batteries you use, what motor you have. This hobby gets expensive when you...
this pic shows that the hummer body fits perfect, most truck bodies would need modified
yes i run 2 batteries, the 11.1v for the fan is very small, only 800mah. It sits on top of the overtray using velcro.
the fan originally had a pc connection on it to connect to motherboard. I...
i love the overtray. It keeps everything clean. I modified mine to have a pc fan in it. Heat is not an issue anymore
i use a...
the front lights in the bumper are #6784
the roof lights are integy roof rack
hard to see in the picture but i have the body...
one big part of racing is finishing. A slash can take a beating and still finish. This means alot to new drivers.