Type: Posts; User: Liam1234
Do you run with aluminum trans case?
Thank you for your information.
I run today with 31/83, and the temp never goes beyond 150'F. But the ESC was not so happy, since it got 140'F every 10 minutes. The top speed is ok for me, but I...
I just wanna know how much stronger is MMP 3800kv over Velineon 3500kv?
I am running velineon with aluminum trans case on 28/76 3s lipo, the temp of motor never goes over 140'F. So I just wanna...
does map 2400kv motor break slipper shaft of rustler easily because of a lot of torque?
I can break one shaft average once or twice a month even with stock motor on 3s.
i am thinking of 2400kv...
Can anyone recommend me a good wing and wing mount for rustler vxl?
what is your motor temp after run?
Does anyone know if the MMP 1/8 2200kv motor can be installed to original gearbox?
I just see that this size of motor can be fit for integy gearbox.
Is anyone using MMP 2400kv motor on rustler?
If running on 4s lipo, what gearing you recommend for highest speed possible while have relatively low motor and esc temp?
I am thinking of getting...
Where do you put your motor?
I will try to put my rear shock like that.
Which rear shock tower are using?
I am using Xtreme racing carbon chassis.
I am currently running on 28/76 with stock esc and motor rustler, also with aluminum trans case, 3S lipo.
The temp of motor after run is 130'F around. So I am very happy with it so far.
I am using GTR shocks on rear, and it fits well, as you can see from pics.
Now, i placed my rear shocks.
Glad you did the same.
I ordered some GTR shocks, I will let you know if it works good. I had some revo shocks before, it never works good because it was too stiff for 1/10 scale car.
kyosho gt1 body is gonna fit.
You can use longer screws, i think 3x30mm, to fix the shock bottom on the top of the caster blocks(TRA3632).
Also, you need to cut the spring length to fit it. The same to the rear spring.
Did you notice that the battery is located closer to the rear than original chassis?
Yeah, how well the traction depends on your taste. With original chassis, if you pull throttle a lot, the car...
It never bottom out if you put shock horizontal, actually you can feel shock become stiffer, that is also a reason that i put my shock like that.
I can run slash body on it, or i can run kyosho GT1...
Here is my rustler vxl, but i converted it into onroad with carbon fibre chassis.
I lowered the chassis a lot, and I put the front shock horizontal.
I am waiting for my rear shock part so that...
Well i run on pavement only, i love speed, fast corner.
I do not like off-road racing. I lowered the chassis, now it has less than 10mm ground clearance so that i have Fast corner with easy...
Does anyone use Xtreme Racing carbon fibre chassis LCG for the rustler?
How is that performance?
After I upgraded to aluminum trans box, the motor temp goes really low.
I run on 28/76 with 3s lipo and temp of motor after each 15-minute run is always less than 150'F.
But new problem comes....
I am running on 28/76 with 3s lipo. The car goes well, crazy fast. I love it.
I used to run 3s with 25/83 gearing. The temp after 15 minutes run was around 180'F.
If you use 28/83 for bashing as i did, the temp would be much higher than 180'f for sure.
My advise is if...