Type: Posts; User: Garfield38
do someone know if it's possible to link the multifonction knob position to a channel. I have TQi 3 channel and the receiver is able to get 5 channels.
You can use a RC switch with a regulator 78L05 to get supply from RC connector and a LM317 mounted in current generator connected to the battery. You have to insert a resistor R=1.2/I on the...
I have bought a gyro reference gy48v for my e-revo vxl 1/16 and connected it between the radio and the steering servo. But it's not working: the gyro led is blinking and my steering...
Today I got an update from the apple store but no metrics again
Here is mount of the hall detector on an e-revo:
I have the TQi with docking base. I bought also a 5 cells nimh that fit in the TQi battery dock.
I have noticed that the nimh pack connector have + in the center and ground at left.
The 4 cells AA...
Hi, you need to remove and add the speedometer on the dashboard. It will allow you to choose gauge with different limit.
Hi, thanks for your post. I have my telemetry working now on my erevo.
My mistake was to connect the battery sensor to the receiver and got always 6V.
I didn't use #6541. I unplug the + connector...
Hi. Great products but I (we) really need metric units on the application software.