Type: Posts; User: bbking9
give me your address. Ill mail you one. I always cut off my on/off switch on other rigs.
in case some of you missed it !!
You may want a one way on the front. Locked diff in rear.
I know you're wondering - yes - I still have it.
Buy a crawler.
You guys are killing me. Last chance before going to eflay. $15 shipped.
Somebody running 3S needs to get the power to the ground.
$16 shipped. PayPal only,
Installed for about 10 mins. Certainly keeps the front end down. But am running on loose dirt and too much traction is not a problem.
$17 shipped - Paypal only
No need to reprogram. It will retain the setting.
I have spent $0 on broken parts (so far).
Still not sure what you are talking about. Push rods mount to rocker arms (is that what you mean by shock brace ??) and lower arms. Bumper mount??? OK Timmy - what you been smokin ?? :unsure:
Huh?? I dont understand.
The Proline Desperados fit perfectly and a little taller and wider than stock. Prp line trenchers, dirt hawgs and a few more of their tires fit the Desperados.
A center diff in your tranny will help keep the front down.
no. stock gearing is fine.
2S is plenty fast for me. 3S - I will probably break stuff. I'd rather set mine up for longer runs times (so I run 2 - 2s ipos in parallel) rather than shorter times at faster speed - but thats just...
Love my AC6 as well. SPCracing lipos either in 2s (2500mah) or 3s (a500) seem to be the batteries of choice. I have the 2S and they are good. and powerful.
I just eyeball my camber and toe in....
Dude, you need to drive in a more open area. This hobby could get expensive for ya.
no failure here after 2 months
Huh?? The box that you put the recvr in is what makes it waterproof. There is a seal/gasket that goes between the lower an upper halves of the recvr box.
The velcro or tape is just used to...
I got a brand new GT3C with 2 recvrs for $50 shipped on another forum. Nice radio so far.
On your radio - make sure the end of the antenna is above the body line. May help.
Tape er down and you should be good to go.
That is the correct recvr. Looks like it has been taken out before becuase there should be double sided tape left on either the recvr or in the recvr box. Just put some more on it and go.
There are all kinds of reason people have problems with chargers or lipos or - you name it. User error many times.
I can only go by my experience. New users to RCs come in on a lot of forums and...
They will work fine at the same time. they come bound from the factory so no need to do anything other than turn them on and run them.