Type: Posts; User: Nixxit
Decided on a Mamba Max pro
Up to 6s lipo!
Lots of amps
The 4500 probably isn't the best motor for me, but ther's room to grow
I have the motor on the way, was planing to use the stock esc but it just went up in smoke
Can some one suggest a good alternative with sensored mode that will hold up to 3s
There are so many...
I didnt even think to check ebay... :rolleyes:
any one have any sugestions or feedback on some of the light kits out there.
I want headlights and working tail/brake lights
sunshine-systems.com seam to be well priced, starting at 19$ while...
First check the slipper,but i had the same squeal/whisle the magnet spun lose on the motor shaft. I've been driving like that for a week, I here you can get a rebuild kit that includes the rotor, but...
Make sure you dont overtighten them they strip faster.
I had the same problem and my wheel was striped too, but I was supprized that superglue works really good!
Broke an MIP rear axel!!! (the pin that holdes the CV together)
this locked up the right rear wheel, sent me into a cartwheel
and broke the wheelie bar
replaced it with a stock axel
Been running on 3S for a few weeks and I guess i just fried the stock motor.
the magnet spins on the rotor shaft.
I HATE waiting for replacement parts :mad:
Is the motor locked up for some reason?
Dose the motor get hot even if you dont give it throttle > if so it means the MOSFET drivers are fried and ESC is done for
what kind of charger do you...
Well that makes sense, thanks for explaning.
How did you do that? lol
I havent had any experince with them but, Id rather deal with it myself than wait for a replacement that will do the same thing.
just my opinion ;)
same Screw fell out of mine on the first run. dose it look like only a couple of threds catch cuz it looked like it only pulled the last few out. I'v been running with it missing and now the other...
I noticed alot of people goin with the desperados but will they work with the splined hex's?
Just mic'd it, 3mm :)
why are you going down from the 3500?
you can get a 4450 from duratrax for around 80$
Im still kinda new
Awsome idea Thanks! Im going to give it a try
drove around location with the Company Man and his nitro revo, then went for some speed runs on assphalt and striped my hex's and wheels, now Im making repairs
Mine did the same thing. I used a small set of plyers to pull it back up. Now i push it down as soft as posible or else it sticks again.
a new ESC will do the same thing the clearance bettwene the...
I've been through 3 hex's in 2 packs. and now ive stripped the stock rear wheels. I have the traxxas aluminum splined hubs on the way, along with some proline trenchers. what wheels should i go with,...