Type: Posts; User: porky-chop
im pretty sure its your lower output gear stripping away ...same thing happened to me!
pro-line mashers or HPI Phaltlines
stock tyres blew up:(
I got both
RPM's are bullet proof , Alluminium bends
20/68 is low gearing for the MMM
mine is geared 24/62 on 4s and it is mad....
temps are very cool too
added a flag:D
yay! up and running again!:)
got my parts today , should be up in an hour:D
ye needed the extended rear mounts!
how the heck u do that!?
just need to put the gearbox back together and shes good to go!
also make sure your gears are mounted correctly....the mesh must be close together but not tooo close , otherwise you will BREAK your gears!.....
they must be loose just enough soo you can fit a...
your gears will be fine , just make sure your slipper clutch is not 100% tightened , make it tight but not immovable....
read your manual about steering setup , make sure A-arms are skrewd in...
er , im using the RPM bulkhead braces?...they seem to be holding my Bulkheads together pretty well?
I confused RPM with FLM!
was thinking since when do RPM make chassis?!
can you show me a link to that?
FLM Shock towers???
where u getting that!!
looks cool man!
you mean aslong as the RIM has a 17mm hex.......
you can put any tyre onto the e-maxx / e-revo!
I got that one , and the steering is way better than stock and a LOT faster
ok cool thanks man!
erm , ok.......and must i put the horn on strait?
how do i center a servo?
sorry this is my first ever rc car and first time iv ever bought a servo!
ok thank you!
do i need to setup the servo atall? or just play and play? do i need to "allign" it because i have been moving it around a bit!
thanks a lot man! really appreciate your help , but before I order ,
are you SURE that those will work!!?
also , do i need to setup the servo atall? or just plug it in a play?
thank you brett , how to I fix this issue??:(
i was told on a few forums that this servo would be fine...guess its not!
the bulkhead braces are too small! they dont fit onto my emaxx!!:(
Also please can you guys take a look at this picture...........
I installed the servo , but the plastic thing...
please guys help me out:(