Search:

Type: Posts; User: ngnaw

Page 1 of 18 1 2 3 4

Search: Search took 0.02 seconds.

  1. Slipper clutch screw needs to be tightened maybe?...

    Slipper clutch screw needs to be tightened maybe? The screw with the spring in front of the spur gear.
  2. Thread: switch to 1/10?

    by ngnaw
    Replies
    13
    Views
    297

    I personally don't see any point in changing the...

    I personally don't see any point in changing the Velineon 380 motor to anything else. Using anything else would make the motor sit higher and thus increase your COG making the MERV constantly flip...
  3. Replies
    14
    Views
    668

    So after some years of messing around with fine...

    So after some years of messing around with fine tuning my MERV I decided to take the whole thing apart and clean it... There must have been some binding somewhere in the front drive train. Here's...
  4. Replies
    2
    Views
    220

    Suspension tuning question?

    Hi guys, I've come back to my MERV after driving my 1/8 buggy and 1/10 Summit and I've got those tuned perfectly. When driving my MERV i'm always hesitant to not flip it over. I have rulux wheels and...
  5. Replies
    14
    Views
    1,078

    Get the sidewinder sv3, put it sideways and make...

    Get the sidewinder sv3, put it sideways and make a mount for it. Search youtube and you will find videos on how to make a mount without cutting or messing up your chassis. I have a bunch of videos on...
  6. Replies
    716
    Views
    419,240

    Sticky: Running video with new Blue Bird steering servo...

    Running video with new Blue Bird steering servo and adjustable servo link


    https://www.youtube.com/watch?v=q09iDNENg1s

    Visit my Youtube channel
  7. Sticky: Onboard footage with Traxxas Summit, which cam do...

    Onboard footage with Traxxas Summit, which cam do you prefer?


    https://www.youtube.com/watch?v=t_Ay8aRUc_A

    Visit my youtube channel
  8. Sticky: First outting with my new Traxxas Summit! ...

    First outting with my new Traxxas Summit!


    https://www.youtube.com/watch?v=IWUYb3q07_0

    Visit my youtube channel
  9. Replies
    7
    Views
    797

    Does it have the EVX-2 with LVD marked on the ESC?

    Does it have the EVX-2 with LVD marked on the ESC?
  10. Replies
    43
    Views
    8,434

    Hi, I used a piece of a composite hockey stick I...

    Hi, I used a piece of a composite hockey stick I had when I cut the stick to length.
  11. Replies
    2
    Views
    544

    So are you finally able to make this MERV drive...

    So are you finally able to make this MERV drive straight? I had to make an adjustable servo link to finally get my trim to 0 and have the MERV go in a straight line with 1 2s lipo in the left battery...
  12. Replies
    21
    Views
    2,053

    Look at the beginning of my video. I made it out...

    Look at the beginning of my video. I made it out of a scrap piece of a composite hockey stick. http://www.youtube.com/watch?v=t7npZaBD3mI
  13. Replies
    8
    Views
    752

    I use 1 servo. I made my adjustable servo link...

    I use 1 servo. I made my adjustable servo link and it is waaaaaaaaaay easier to adjust and my trim is at 0! Fine tuning is easier and I find that it should be a part they make available. My 2 cents....
  14. Replies
    8
    Views
    752

    I think the shock ends will work! Going to find...

    I think the shock ends will work! Going to find the headless hex screw with the left and right hand threads on either end.
  15. Replies
    8
    Views
    752

    I will measure them and see if it'll work. I was...

    I will measure them and see if it'll work. I was thinking of cutting the stock link and then using the headless screw to connect them, will drill a small thin hole to thread into. Why doesn't traxxas...
  16. Replies
    8
    Views
    752

    Adjustable Servo Link for 1/16 E-Revo

    Does anyone know where to get an adjustable servo link? I was watching a video by Jang on UltimateRC and he was showing how to adjust your servos properly on the 1/10 E-revo, since they have 2...
  17. Replies
    14
    Views
    668

    Ok. Back on the topic of the RPM gauge, do you...

    Ok. Back on the topic of the RPM gauge, do you use 1 or 2 batteries in your MERV? I use 1 in the left battery compartment to balance it out according to the manual. DO you have one side measurement...
  18. Replies
    14
    Views
    668

    :D The point is about the RPM gauge, not the...

    :D The point is about the RPM gauge, not the other brand of RC even though you said "The picture below is not a MERV but the method will work on any RC"

    .... geez...
  19. Replies
    14
    Views
    668

    I have the same gauge and used it for my HPI...

    I have the same gauge and used it for my HPI Vorza. It tracks straight as an arrow. I will make the wood plank and then use it on my MERV too... Just been lazy this winter! I want my MERV to track...
  20. Replies
    3
    Views
    258

    Acetone!!!

    Acetone!!!
  21. Replies
    13
    Views
    421

    Send it to Traxxas :D They can put it on the...

    Send it to Traxxas :D They can put it on the mantle to display they got a part that never ever broke before! and to mention you were the very first to break it! Maybe they'll send you a free one! haha
  22. Thread: servo?

    by ngnaw
    Replies
    28
    Views
    575

    Just ordered the Bluebird 390...

    Just ordered the Bluebird 390...
  23. Replies
    9
    Views
    526

    Not rabidly pro-Traxxas... Look at my...

    Not rabidly pro-Traxxas... Look at my signature... Just rabidly pro-RC!!!!!!

    FOr the cornering, I solved that problem with better non leaking shocks (GPM with 60wt oil front and rear) and wider...
  24. Replies
    26
    Views
    1,629

    I'm leaning towards GPM ($40 for 4 plus shipping)...

    I'm leaning towards GPM ($40 for 4 plus shipping) + a new servo which I am still not sure which one to get as I want least mod possible, I think someone said to get the bluebird 390. I want to get my...
  25. Replies
    26
    Views
    1,629

    Can the stock ones be adjusted somehow to stop...

    Can the stock ones be adjusted somehow to stop the wobble?? Why are they made that way?
Results 1 to 25 of 433
Page 1 of 18 1 2 3 4