Type: Posts; User: trax de max
Possibly but the esc has to handle it.
Speed depends on gearing. Two motors increase torque allowing to gear higher for higher speed, but adding another motor geared the same won't increase any top...
1) depends on how much it's discharged and/or out of balance and charger. But on paper 60 minutes at least.
2) The charger will show that it's charged.
3) As per answer 1.
If they're not mechanically sealed how are they sealed, that's what I meant.
Are you thinking the cells are filled with a liquid like a juice carton.
Enlighten me on how it's sealed chemically.
If it's been short circuit, it's damaged and just a waiting game for it to get worse. Lipos aren't naturally sealed it's a mechanical process.
What charger you using.
The battery you linked is 10000mAh. Charging that at 2C requires 20Amps needing approx 250Watts of power from your charger.
Some companies are starting to lower that figure now.
8.4 is charged.
Before you start experimenting this is what could be happening.
The battery voltage sags under a load which is triggering the cut off. lowering the cut off is stressing what looks like an already...
2A is still quite low considering what the discharge rate is when running in the RC. But if your doing a forming process I used 0.7C of the battery capacity. I haven't used Nimh in vehicles for a...
When you measured the voltage is that under load, or resting voltage.
More volts = more money and down time.
Could it be one battery is more drained or out of balance than the other which would give the longer charge time, 45minutes more is a long time.
Heavy grade is for diffs, lighter grade for shocks. You wouldn't use the other way round. You'll have two or three options for diffs. The heaviest you can get and the second heaviest. Then just mix...
Your first part of your question says "Anybody know what traxxas 30k,50k and 100k means" I gave an explanation, if you already knew it, why ask.
To the next question it's just gonna be a case of...
cst is a standard measurement, wt varies from manufacturer to manufacturer. It's much easier to stick with one brand and try experimenting. The higher the number the thicker the fluid, I have traxxas...
Remove the wheels and try that, if the noise is still there remove the centre shafts.
check the wheel hex's, and if they are good tight fit in wheel. not rounded out.
Good points, I can only assume the batteries are charged at home and maybe topped off at the area where ever that may be. Yea most need the acc on to power the outlet, but some have a 2nd outlet with...
The one that charges or discharges quickest on the charger while you check voltages on the charger very often. @max C rate.
It is possible to have more capacity than rated, it's only a nominal rating. But this is generally a few hundred mah, never seen nearly 1000 before. But that's charger reading.
For a 5000 pack I...
680mA seems a lot after a ten minute rest, I'm sure I done a check couple year back and managed under 30mA, maybe 17 from memory.
It's ideal if when using packs that they're not run down to low...
If your charger put 5000 into a 5000 pack, your batteries were drained really low, or your charger is overcharging.
Hmmm Europe, that's the game changer. It's probably cheaper buying a new unit from eBay.