Type: Posts; User: KewlToye
I saw a Slash 4x4 with large wheels and tires mounted, that allowed for clearance to run in grass...
Which wheels / tires fit for this?
2.8 inch? Larger?
Does the slash use a 12mm hex?
I'll double check Polarity and Voltage, but with the Traxxas Receiver connected to a Tekin RX8 ESC, and either a 2s or 3s LiPo battery, when I plug in any of several integy fans, that...
So the one marked battery is the only one that should be used?
Traxxas 2.4ghz receiver, what is the proper wiring pins to fan?
Black-outside (- negative)?
Red-middle (+ positive)?
Black wire is the outermost wire as I understand it. I presume that the...
Great information as usual
That explains it. Thanks for the info! :thumbup:
Good Point. I agree.
I was just leaning toward "the cooler the better" especially with summer approaching.
I came across a "double stack" fan unit that would bring the total fans to 3) including...
Thanks, I though I had seen that some folks were having issues with more than two total.
I had been running the Traxxas model that is designed to snap on to the ESC, and I had wire-spliced a second...
How many fans can the Traxxas Receiver run?
Limit of 2?
That is so awesome!
I've been trying to get my disabled son interested in playing with the RC cars, and this may be the key!
Where is a source for the stickers / decals?
Oops, typo on my part.
The 4600 is rated 180amps
I got it confused with the other toy> Tenshock 5200 rated 200amps
5200 Testing on 2s coming soon... evil laugh...
You asked for a simple answer, and are concerned about heat, perhaps posting a new topic for specific input on "how hot does it get" from those who have those systems on 2s will give the simplest...
I came across one of these at a Local Hobby shop, and I got it, because I like to support Local Business's when practical.
It works exactly as described by you.
The LHS owner...
I ended up with:
Tekin RX8 ESC (mostly because it is the current rage with my local buddies, and one of them had an extra one I was able to buy).
It is nice and smooth, though pricey (~$200). It's...
I'll set that one aside, and try one of the others I have.
This one was just purchased, so I should be able to exchange it.
Thanks for the help.
So, correct wiring... bad motor?
I'll have to figure out why, but
wiring red/black wires from receiver ch3, to red/black wires on integy fan = no fan turn,
and little wisps of smoke came from the fan motor....:eek:
Thanks for the response!
Is it possible to power a motor cooling fan from the plugs on the receiver?
If so, which terminals?
Thanks for all the tips guys...
!!!! Victorias Secret RC Supplies!!!!!
Thanks for the tips.
Consider a Tenshock (or similar) motor and run it on your existing VX3 ESC.
I plan to try that this weekend.
Before I spend $40 on an Outerwears Jacket (piece of fancy fabric with velcro attached)
Is there a decent substitute?
Is the outerwears water resistant?
Does it block dust?
I've seen only good reports about the D8 conversion.
It is hard to get the springs soft enough.
The SC10 4x4 shocks (used) may be had for cheaper $$ as some of those folks upgrade to newer.