Type: Posts; User: RumbleBee
Looks good. Several months back I used a TRX servo with Futaba S3305 gears with decent sucess. Still working good?
If the spur spins, its not a major problem.
Sometimes mines does, and sometimes it doesnt. If it does, it may just be spinning the spur instead of the opposite wheel which would explain why one...
I think that is the first VXL motor I heard that went!
For me "Vintage" is a TRX SRT, TRX N Stampede .12, Tamiya Juggernault, etc. Cintage is something that is rare, valueable and a classic. The Stampede is old. They still make it.
Try holding the spur (with the truck off) and spin the tire. Some times mine does that and it is spinning the spur slowly.
That wouldnt be accurate because of how big the bike tire is vs the RC tire.
First, I love the marker on the tread. :p
I would say roller 30 and RTR 50-60.
I bought a Rustler XL1 RTR for $50 back in 2008.
If it had VXL steel gears and 5x11x4 bearings Id say 50-75...
When a differential is bad my truck usually sits and "revs" because it spins the differential gears instead because they are easier. The Stampede comes with I believe 10,000 wt diff fluid which...
Sometimes disney channel shows
JAson Brittons show I believ it is Stealth Riders
To my knoledge Proline discontinued the original masher and only offer the Masher 2000. Either way I heard the TRX "masher" is hard and doesnt provide good traction. I have ran a m2k, and can say...
just put a socket on the front. Sometimes I run a 5/8 deep somedays I run a 17mm. Depends on wind and traction.
I use http://www.shopatron.com/products/category/Masking+Tape/184.108.40.206.6089.59220.127.116.11
and sometimes liquid mask: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXC099&P=ML
Liquid mask is...
I painted one of mine white and one black some years ago and the paint is still holding. I used Pactra polycarbonate paint.
I used my M2Ks with lipo a few times, and they are crazy. I also use an Onyx 230 and a Losi Ballancer. The lipo I use is a Venom 3s 11.1 5400 and it fits in the Stampede with no mods. You just need...
I love the Masher 2000's 2.2 They have great traction, even on wet pavement.
Agree. I never had any battery blow up, and out of all the nimh packs I tried to blow up, I had no luck.
mdlopez1; As for the truck, you may want to have the esc looked at. Back some months...
2009 GSXR 750 ltd UK model
2007 GSXR 1000
2005 GSXR 1000
2004 GSXR 750
2005 CBR 1000RR Repsol
1999 Suzuki TL1000R
Harley Davidson Vrod
2005 Honda Shadow
90's GSXR 1100.
I agree. I love that shade. If I can every find a stock Pede length 80s K10, it will be that color.:cool:
Enjoy. Last summer we hit 120s one atleast, and was usually 95+.
You can extend your chassis for cheap (look up user Rag6) and that will let you run Revo/Maxx 2.5 Bodies. The mod cost about $1-7...
To this day I love M2Ks. They hook good on and offroad, and there is only one lot they wont hook on off of Oakridge road, but that is the only place they dont hook. I use a mix of Super T (I believe)...
Nice. What rims/tires are those? Love the old school body.
Try to stiffen up the rear shocks, and tighten the slipper. If that doesnt work, your tires are most likely not getting enough traction. Im geared 23/90 or 86 on my extended VXL stampede and can lift...
The something from the pipe may have been the baffle. I done that and left the air filter on and am pleased with it.
Im not sure if you need parts, so here is some:
Same here. :D :fear: