Search:

Type: Posts; User: Stang8URMPRT

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Took the truck out and left the slipper clutch...

    Took the truck out and left the slipper clutch really loose. Looser than I feel comfortable with, but it didn't kill the gears. I will continue to run the truck with a really loose clutch and...
  2. If/when it strips the gears again, I will do...

    If/when it strips the gears again, I will do that. Thanks for the advise.
  3. Yes... Been running 3s and brushless since the...

    Yes... Been running 3s and brushless since the truck was about a month old. So approximate 7 months.
  4. Sure, the trans is already back in the chassis......

    Sure, the trans is already back in the chassis... so I'll get as good of pics as I can....

    http://img.photobucket.com/albums/v398/Stang8URMPRT/image_2_zps356d90c8.jpeg
    ...
  5. Here is the trans before bolting it back together...

    Here is the trans before bolting it back together and obviously putting grease in. If anyone sees anything off, please let me know...
    ...
  6. Btw, mine is blue.

    Btw, mine is blue.
  7. I agree, reod.... If I adjust mine any looser it...

    I agree, reod.... If I adjust mine any looser it destroys the clutch. I guess a "split second" is a very vague description. Mine will slip quite a bit before full engagement. If I adjust it any...
  8. I do agree with trying their suggestion. The...

    I do agree with trying their suggestion. The problem is a "split second" equals more than two feet with 3s and a brushless setup. The slipper is set up correctly. The major issue I have with this is...
  9. I sent this in response.. I would agree with...

    I sent this in response..

    I would agree with you, but the input shaft into the trans has a pin designed to sheer before is takes out the top gear. After three sets of internal gears with your...
  10. This is the response I got from RPM. ...

    This is the response I got from RPM.


    Usually when we hear of problems stripping anything in the gearbox, it is because the slipper clutch nut is set way too tight. Essentially, you're...
  11. I mean, it's nice. But I only purchased it for...

    I mean, it's nice. But I only purchased it for the heat sink. The price was lower than a full metal case, too. I'm thinking of just buying another trans from a chopped truck and sticking it in for...
  12. I would agree with you. I have contacted RPM...

    I would agree with you. I have contacted RPM about the problem and haven't received a response yet from them. The only variable that's changed from not stripping gears, to stripping gears is the case...
  13. Always metal (steel) gears. Slipper is adjusted...

    Always metal (steel) gears. Slipper is adjusted about 1/8 off tight. It slips for just a split second before full engagement. Never had the gear box open before I replaced the case with the rpm one....
  14. The three times I've broken it I've just been...

    The three times I've broken it I've just been going back and forth in parking lots. Not really bashing at all.
  15. There are no spaces or openings either. Bolts...

    There are no spaces or openings either. Bolts together just fine and looks great.
  16. Case was cleaned spotless every time. All Teflon...

    Case was cleaned spotless every time. All Teflon spacers are in place per the transmission exploded view. I'm stumped.
  17. I don't know how exactly it got there, but I know...

    I don't know how exactly it got there, but I know I've put this thing through lots of mud and water. Just never thought of tearing it apart because it's supposed to be water proof.
  18. Velineon Tear Down. Major problems found

    I tore my Velineon motor down after having major transmission gear issues. Before tear down, I noticed a ton of shaft place (bearing very bad). Upon opening it up, I found literally a 1/4 pound of...
  19. All were replaced with new Traxxas bearings the...

    All were replaced with new Traxxas bearings the last time I had the top gear and idler blow out. Happened again today within 10 minutes of use. I may have found a problem... I don't know if this is...
  20. Problems with RPM Hybrid Transmission Case

    I installed this trans case a while ago, and every time I take the truck out, I strip the idler, diff, or top drive gear. It's getting really freaking annoying!! I have installed everything...
  21. Yep, all the stock screws work.

    Yep, all the stock screws work.
  22. I have heard you can drill a very small hole...

    I have heard you can drill a very small hole straight down into the middle of the tread and hold the throttle wide open to get the water out... But don't drill it anyway but straight or the tires...
  23. Replies
    33
    Views
    2,344

    http://img.photobucket.com/albums/v398/Stang8URMPR...

    http://img.photobucket.com/albums/v398/Stang8URMPRT/image5_zps3ecb0115.jpeg

    Well worth the money. Kept the stock one in place too... Added protection.
  24. What he said.

    What he said.
  25. Made my Son-uva Digger a little more realistic!

    With some blue LED head lights from Bill's Custom RC Lighting. I couldn't find exactly what I wanted, so he made me a kit (and way cheaper than I thought it'd be!) Think it looks pretty cool!
    ...
Results 1 to 25 of 66
Page 1 of 3 1 2 3