Type: Posts; User: crook 4x4
Replaced bearings in motor and all is well thank goodness didnt have to buy new motor like i was led to believe by the lhs.
Which one's are you using? Or would you use.
Will these work and has anyone had any luck with them on the stampede 4x4. I cannot keep factory ones on my truck.
4555x,4352x,3652x Which ones are you using?
Which ones? 4352x or 4555x or 3652x???
Motor still works but the front bearing is loose, its like the weld or whatever holds the bearing in place has broken.
Havent picked em up from lhs but if they are white I guess i will not get them. Thankyou
Thankyou so much for your help
I cannot keep the front tires on the ground with the vxl super fast
Has anyone tried the nylon cv joints? I got tired of my LHS ordering me the wrong ones so they said they didnt have any, but the nylon.
So there is still no way to adjust them, right. And is all stampedes rear ends like the picture i posted on the link. The picture of the truck on the traxxas website sure isnt.
THankyou I will try that, but for now I have to get to work I will let you know how it goes.
Ive tried everything the back wheels are slanted in, the left more than the right. I took it to my hobby shop next day and they said it was normal, but I dont think so. When I hit the throttle it...
Th motor fan I purchased has covers over fans. EA racing. But does not fit very well on 4x4 pede, although looks same as integy except one of the fan mount was bent as to cool the front of the...
Picked up the sink and fan combo thing works much better than i thought it would. Only it doesnt fit as well without bending. But thankyou for the advice.
thanks I have a fan for esc, was thinking about heat sinks for motor but was thinking that if they taped on they wouldnt really help. Also i took the motor out of my 4x4 and lubed it with a drop of...
Hey guys I have 2 pedes with the both have the brushless velinion motors, how hot can these motors get. After running 3s 5000 lipo the motor is so hot ya can barely touch it, is this damaging to...