Type: Posts; User: junval
Whats the name of the that heat sink and fan
I have read the thread and I have had the nuts come off using these adapters. If you use a alen wrench to put these nuts on they will loosen up on you that's why I modified that tool.
Take that 4 way wrench that traxxas gives with there trucks and grind the 5.5mm side down untill it fits. Tieten the screw with the wrench and they will stay on.
AKA but you got to tieten the nut with socket not a alen wrench
Sounds defective call Traxxas
Here's my f100
Here's my $24 ebay knock offs
I have two RTR and I have broken 2 rear hubs so i switched to the aluminum hubs, now I broke 6 axles and I live in California so weather has nothing to do with it.
Thanks I took it to the track today it has way better handling with these tires the only problem is I keep breaking rear axles.
Here's my AKA's
I beat the crap out of mine so I wanted to replace it.
I just left there store they didn't have much, no axles but a front bumper center drive shaft front hubs and other little parts
I got the front bumper...
I had some aluminum ones on a old buggy I put on, they were almost the same size these have a little more travel.
With the 7 cell battery I could clear the center jump but I couldn't clear the third one must be the lipos
2.5 it's a proline body and really takes a beating with no cracks.
I had this t-maxx body laying around so instead of bashing with my original body which is starting to break on the rear I put this on. So far it takes a better beating than the stock body, it just...
This truck is bad! someone is going to come out with upgraded axles sooner or later
Edited for Language
I like the way it looks do you get tire rub and what kind of adapters are those.
yeah it is gene hackman the movie is Enemy of the state
I was just having fun guys
Yeah I used the 14mm hexes on the stock axles. My plan was just to see if they fit I had no plans of coverting it to a MT
Well I learned the hard way, I don't think i'll try that again
I ran it with stock gearing and the battery was a 6 cell 3300mah not fully charged
So I was bored and decided to put my t-maxx wheels my my slash I ran it for about 5 mins and pop there went my axle. It twisted the other axle too I hope I can find some new ones ahe hobby shop...
The rear hub carriers are from a nitro rustler part 1952x I put them on yesterday and fit perferct. I broke one and took my parts manual to the hobby store they told me they had no parts but when I...