Type: Posts; User: hallj29018
Need some input on everyone's experience.... I have mine set to the 19 mm position and was wanting to know what everyone else is running to help keep wheelies under control.... I also have a wheelie...
http://img.tapatalk.com/d/14/06/22/sy2u2eda.jpggot some road rash today
Drano crystal is what I use
I put a small drop of blue thread lock in the police it threads into just to be safe and never had a problem out of my steering!
Some stuff I found at a local fastsnal
I got the same ones just took the hard case off and put my own shrink wrap on.... They work like a charm...
When I first got my erbewp I only had about 4-5 runs on it and the mxl-6s went poof but traxxas fixed me up with a new one. It acted like my motor was locked up at first then wouldn't run at all and...
Like the title says I'm looking for some input on which sway bar kit to get... Tekno or traxxas.... I'd like to hear the pros and cons and some opinions thanks a lot!!!
I race my truck on a friends...
Rear bumper conversion?
38/14 mod 1 gear and the motor temp got quite warm today so I'm going back to trusty 18/54 0.8 gears
I tried some new gearing 38/14 mod 1 pinion and the only thing I noticed on a test run is that it's a lot louder than the stock gears
Ok thanks a lot every one!!!!
I use the traxxas 6 amp as of right now and it's the stock mxl-6s low voltage setting as soon as it cuts off I stop the truck where ever it's at to to it and turn off the esc and unplug the...
They were at 4.10v/c when I noticed that the mah was above 5000. So it's safe to let it go as long as it's doesn't exceed 4.2v/c
I have a pair of 5000 mah 3s that have charged up to 5600mah one time I was just wanting to know if this is ok and if it will hurt my batteries and I have kept a close eye on them since then to make...
I have pair of the 5000 3s's love them and they have so much power!
Any advantage on the way the motor is mounted other than for battery placement?
http://img.tapatalk.com/d/14/03/23/azuredy6.jpgput some silver on my wheels and tires... Not too shabby!
It's just the noise of the motor.... Due to it being a 4-pole motor just remember a tick of play between the pinion and spur and all the other noises are normal.... Hope that helps!
Ended up trading but then I honestly felt uneasy about the whole deal and got my esc back deff learned my lesson!!!!!
Sent from my iPhone using Tapatalk
Is it woth to trade the xo-1 esc for my mxl-6s I don't use mine in wet conditions so that's not a problem what are the pros and cons if any all input is appreciated and thanks in advance