Type: Posts; User: sevenfifty
I also fitted the summit body on my Emaxx.
Here is my Emaxx with MMM.
I have the same problem with a new diff!
After tightening the screws the diff is notchy.
When i loosen the screws, the diff goes smooth.
I opened the diff, but could not find something wrong....
Now i know what shock socks to order. ;-)
Can you tell me, what outer diameter the stock BB-springs have?
At the moment i use springs from the Integy Progressive Spring Set ( http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKTH5&P=7 )
with my stock ultra shocks.
Now i broke my second ultrashock.
That was the mistake i made, when getting my new 3PM :o
Works on 4s and 6s without problems.
The Futaba Faast 3PM RX fits in the waterproof box.
I really like that!!
What are the correct body posts to get?
TRX5616 (extendet Bodymounts) >>> do they fit on the RPM shockmount or are the tall RPM mounts#80172 long enough?
I also use the 2 speed conversion!
My lipos are "SLS ZX 5200mAh 2S2P 7,4V 25C/50C Hardcase CAR"....so power is no problem.
Gearing is 24/68(stock spur).
I broke alot of part since going...
I run 2x2s lipos in series with MMM.
I measured 44mph and strongest current was 86A, what makes an poweroutput of 1320watts.
So use good lipos!
I went to MMM on my 3 month old Emaxx and use 2x2s5200 lipos.
Gearing ist 24/68(stock spur), but will lower geraring in summer.
Enough power for me and for the emaxx. ;-)
Upgrades? Yes, many!...
I also busted my rear diff!
Because money is a problem at the moment, i will go for the original.
What shims (to remove play) and what diff oil do i need?
Thank you and greetings from Germany!
I repaired my wheeliebar and it works!
I just took of the broken parts, shortend the wheeliebar and drilled 2 holes.
After braking the second wheeliebar, i am looking for a better and stronger after market wheelie bar for my Emaxx (3905 with stock chassis).
Thank you and greetinhgs from...
Wow, Tony send me a mail..."your order has been shipped!
That is fast and nice service!!!
I will also go for Tonys Screws!
Thank you all!
Here you go >>> http://www.greatassemblyrc.com/Great_Assembly_RC_s_Alloy_and_Titanium_Traxxas_Parts.cfm
Thank you all for your input.
I emailed Dave yesterday to get a shippingrate for Germany!
Does it make sense to use different/better screws?
Yesterday i mounted my new RPM shock tower to the rear of my emaxx.
The instructions says to mount the side with the counterbore to the chassis.
On the picture on the RPM-website it is mounted...
Yes, i want to use the stock chassis.
Is dremeling the rear of the chassis a big deal?
I already mounted the RPM skid/wear plates!
Thank you very much!!!!!
I like your "2cents"! :D
That is the info i was looking for... i will go for the GA-set! :)
Thank you very much!!
Grettings from Germany!!
Yesterday i broke the third front bulkhead on my emaxx 3905 with MMM 4s.
Shocktowers and arms are from RPM.
Now i want to get some FLM or GARC Bulkheads/braces for the front and rear,...
I think, this is the same and cheaper! >>> http://www.himodel.com/cars_trucks/R_C_Car_LED_Light_System.html