Type: Posts; User: hotbodz88
Looking at upgrading to an Os21TM , just curious on the breakin , is it the standard breakin procedure or is it the same as for traxxas ?
yes to both those , it does make a big difference , also do the brake mod with anttena tubing inside the fuel tubing , just a fraction shorter.high torque servo and it will lock up...
check this link out , should have all the info you need
try this , should have all the info you need
spek dx3 is awesome , comes with 2 recievers and you can run upto 4 models just switch to different channels for each model, you can also programme different settings for each model as well.
if you really want them on you can put them on with zip ties
ths is awesome ,
battery is in the top slot . next two are either steering or throttle. my servos have orange , red and brown wires . red is in the middle , orange to the left and brown is to the right , dont know if...
well said ...... lol
might be a split conrod , possible that the conrod is still spinning and hitting the side of the crankcase ?
i have THS pipe also , check the gasket , sometimes after a few tanks the gasket can get a little brittle and slight movement can affect it
i had the same problem ,drove me nuts for about a week till i found this. you may want to check yours, mine was i hairline crack ,hard to see.
i have the THS also, cant complain good overall power and wheelies on demand
had a blonde day with the camshaft .....lol but you guys knew what i meant haha.
go with the jato its more versatile and more fun . was thinking of the 4tec myself as well but check out the 4tec forum there is very little info on there not like the jato .
i have a ace servo in mine for the steering, 14kg torque,alluminium housing with heatsinks.,all metal gears.
can someone please tell me the part number for the camshaft for the nitro 4 tec . is it the same as for the jato 3.3 ?
i use autosol metal polish , it cleans it up nicely
do you still have the stinger ? if so just jb weld it back on , thats what i did , still works fine.
what are those on road tyres and rims you have . do you have a link for them
new era do the wing i think , i used an old wing off a buggy i had , it fits perfect
spektrum dx3.0 i agree has a built in fail safe also and you can program up to 4 models
yep , if you dont need the roto start tool you can just buy the roto start seperate
does this carb make a huge difference in performance ?
i have a rotostart also , i see in your picture how you have installed the rotostart , turn it around so the roto is next to the rear tyre and the standard header will be ok.