Type: Posts; User: jdennis3
Baking is the best IMO. Acetone can work the best by far but it is time consuming as mentioned and you have to buy acetone :( I guess I have not boiled yet but to me seems like would have more of a...
Do the 3800 for sure!
+1 on gear mesh
Very smooth transaction! Would deal with again! Thanks
If your not bashing or just like the look of them then I wouldn't even use them, from my experience.
Ya would need the same parts as converting a HCG slash 4x4 to the newer LCG. Plus the center driveshaft since the pede one I believe is shorter than the slash/rally.
Or these then you can have all 3 :)
Just make sure you tighten the nut down to hold the wheel on to keep the hexes good!
It's probably 5mm. Just get 32p pinions and keep your spurs you have now. For gearing we will need to know what kv motor you got.
Badlands are great for off road! I like Calibers too. Pretty good on any surface. But like any tire with tread driving on a hard surface will wear them out.
The XO-1's are great. I have them with the 5mm axle so no need to change your hubs or castor blocks.
Nitroelectric sending you a PM...
On 2s with my 3800 I ran 16/54 so I would try that out or maybe higher
Lay off the trigger a little when exiting :)
Is it same width as new lcg traxxas chassis? If so you came use a Hotbodies Ve8 body
What's your price range. I might be parting out my slash 4x4 which has the traxxas cvd's with the correct outdrives (not XO-1 ones) and they should work on the pede too since same platform besides...
Hot racing makes a motor mount too. I like the traxxas cvd axles but on 2s with stock motor probably will not need. Just check to make sure no screws backed out during shipment. Hope you enjoy your...
Flint or magnesium bar/stone. Like what you use to start a fire when camping. The stuff that sparks to light a lighter. Just strap one of them to your chassis and would spark like CRAZY!
I see it has holes for body post but is it to thick to fit the body clips?
Just throwing out there. Are your battery ends and esc plugging together correctly positive and negative.
Ya I like the MMP and castle support is good, at least for me has been. But ya just find out if any motor restrictions. Don't want to buy a motor that can't use if planning to race. Those both look...
Are you just going to bash. Also what cell batteries do you plan to use. Are you planning on keeping the stock ESC?
Do they follow Roar rules. Or are their any restrictions on can size?
What motor was it, kv?
I think i read people using the tekno ones. Probably have to be modified I'm sure. How is that chassis?
I have some with a sway bar set if interested pm me.
Nice smooth transaction. Would deal with again. Thanks!