Type: Posts; User: entjoles
sold pending payment.................
this truck also has rpm true tracks on it , forgot to mention it in description
here it is , its sold as a roller with no electrics or servo
will include the twin motor mount , an extra stock spur , and the extra sway bars
$325 shipped to the lower 48 , paypal only
i put a vid of mine with a 4.5 in the video section , its geared 12/68 and using a mmm on 4s, raced yesterday and temps on the motor were 135 at the end of motor , and 125 on the heatsink , punch...
here are 2 vids of my e-revo , i was filming and let a guy who was at the track give it a go , he couldnt believe how easy it is to drive
check it out in full size , its ok considering it was...
has anyone got one yet and if so how does it run on the track?
is it diffing out badly?
did it help turn in?
some updated pics
single motor mount and my current bl system hvmaxx 4.5 geared 12/62 and mmm , runs great and cool , although i have to use a rx pack to keep my mmm alive , also used black grill...
there is thread lock on them from the factory , your best bet is to hold the bottem side with a 8mm wrench or vise grip , and then unscrew the 2.5mm screw , a good set of hex drivers will help as...
last post here...............
its been working for me as well, i just put the rx humppack in the servo location as i am using one servo...
what lvc are you using?
also the c rating of the packs makes a big diff. on how they perform
if the cells voltage is dipping to much under load the lvc will shut you down
that said , you...
4s hvmaxx 4.5 motor geared 12/68 mmm esc. using rx pack cause my esc. doesnt work w/o it ....LOL
does anyone using the traxxas sways have there hinge pins in the lower holes.
right now i have them in the upper ones but i am wondering if there is any benifit to having them in the lower...
any updates on your shock set-up?
got it back and it failed with a ccbec , took it off and used the internal, then it failed with the internal bec , so i left the red wire in and use a rx pack and it is working...........
great job , and the best part is it still will be easy to work on
i like your cf servo plate, i did the same thing with plastic , which is what i made my esc. mount out of as well
$275 for a roller with servos and no mods
i run a hvmaxx 4.5 geared 11/68 for about 38-40 mph with a mmm esc. , motor temps are 130* and it still will pull a wheelie , i would say that it would be good as long as you gear it right , probably...
charger is still for sale
traxxas2514 clean out your pms
btw.... it will ship today , ill pm you the tracking # later
bump, anyone , these are way cheaper then ebay folks
like the title says ,traxxas or tekno for the e-revo, how is the fitment , and which do you recommend , pros cons
pm sent for sways , if still available