Search:

Type: Posts; User: Manne

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Im using the stock tires. Tried some proline...

    Im using the stock tires. Tried some proline paddles for the losi five 5sc, way too narrow, the stock tires are better s they let you float more on top of the snow, and balloons more which helps in...
  2. Thanks alot!

    Thanks alot!
  3. Easy X-maxx winter bash, plowing trough powder and hitting ramps at 8s

    Did a short vid today:). Plowed through some powder in the beautiful winter weather here in Norhtern Sweden:D:.

    Running a Leopard 5882 1360kv motor, Hobbywing max6 esc 20/54 gearing on 8s. ...
  4. I amongst others find that the HR diff cover...

    I amongst others find that the HR diff cover helps ALOT. The edge on the stock cover is to thin and flexes around the bearing area making the diff move sideways under heavy load I think. Great write...
  5. No other parts needed. Same thread, use the same...

    No other parts needed. Same thread, use the same nut. Just make sure the piston gets centered on the shaft. You will understand when you are doing it :)
  6. Replies
    26
    Views
    696

    I use the stock holder with a strap, works like a...

    I use the stock holder with a strap, works like a charm. Read here: https://traxxas.com/forums/showthread.php?9071397-Manne%B4s-xmaxx-bash-build-thread-now-with-working-pictures
  7. Replies
    22
    Views
    1,226

    People seem to forget that throttle input is...

    People seem to forget that throttle input is limited to 50% if the temp sensor isn't plugged in!
  8. Replies
    29
    Views
    1,520

    I know that many here have run 8s on the stock...

    I know that many here have run 8s on the stock motor with sucess for longer or shorter times, but i would strongly advise not do do it. I have blown three magnets doing just that. To much rpm. It...
  9. NO no no no! Let me clear this up. You open up...

    NO no no no! Let me clear this up. You open up the shock, remove everything including the shock rod end, flip the shaft and only the shaft upside down.

    You do this because the shaft has a non...
  10. Replies
    436
    Views
    30,609

    Why a new 15 tooth? 1.5 mod?

    Why a new 15 tooth? 1.5 mod?
  11. Replies
    436
    Views
    30,609

    Thanks cheezy! Great pics with measurements and...

    Thanks cheezy! Great pics with measurements and everything!^_^
  12. Replies
    436
    Views
    30,609

    Would really like to see comparision pics of the...

    Would really like to see comparision pics of the old vs the new ring/pinion gears in the diffs!
  13. Here is a short clip from when we were trying out...

    Here is a short clip from when we were trying out the new setup for the first time. I don´t like the 5sc trenchers at all. The only upside is that they hold up to absolutley everything, but i miss...
  14. And I almost forgot! I´m sick and tired of...

    And I almost forgot! I´m sick and tired of breaking the upper a-arm mount/bulkhead, so I did this:
    http://cdn07.dayviews.com/500/_u2/_u3/_u8/_u9/_u2/_u1/u2389215/96978_1481709699/l.jpg

    I also...
  15. All this was a long time ago, since then the...

    All this was a long time ago, since then the truck got a new motor, since I managed to blow the magnet three?! times on the stock motor on 8s. First I had it geared 18/54 but it keept overheating on...
  16. Time for an update! Got tired of constantly...

    Time for an update!
    Got tired of constantly getting water into the receiverbox, so I installed a E-revo brushless edition receiverbox instead up high where the telemetry expander is supposed to sit:...
  17. Update: Since i´m running four lipos on each...

    Update:

    Since i´m running four lipos on each run i´ve got kinda tired of waiting for the batts to charge, so I updated my charging station. Old stuff in the down left corner.
    ...
  18. Made a extension to read cell voltage on the Tqi:...

    Made a extension to read cell voltage on the Tqi:
    http://cdn07.dayviews.com/500/_u2/_u3/_u8/_u9/_u2/_u1/u2389215/37119_1481709620/l.jpg

    Installed the Hw Max6 and rised up the fan so no pebbles...
  19. Manne´s xmaxx bash build thread now with working pictures.

    This is a modified repost of my original build thread since the pictures didn´t work properly in that one. The mods are welcome to delete the old one.

    So, since I have done some stuff before:
    ...
  20. Replies
    18
    Views
    398

    So no one forgetts :rolleyes:. There is a much...

    So no one forgetts :rolleyes:. There is a much cheaper way to get bulletproof shockshafts. Take a stock shaft and turn it upside down. They are milled different on the piston side as shown:

    The...
  21. Replies
    436
    Views
    30,609

    You can put 3.5mm pins on the stockers, requires...

    You can put 3.5mm pins on the stockers, requires some work but totally worth it. Works much better. I'm using high quality bosch drills cut down to the right lengt.

    I also use differential...
  22. Replies
    14
    Views
    1,008

    No, the new bulkhead has different sized bearing...

    No, the new bulkhead has different sized bearing holders for the gear/centerdiff.
  23. Replies
    14
    Views
    1,008

    I know that many here have run 8s on the stock...

    I know that many here have run 8s on the stock motor with sucess, but i would strongly advise not do do it. I have blown three magnets doing just that. To much rpm. It held up longer on tall gearing,...
  24. Thread: Front Bumper

    by Manne
    Replies
    17
    Views
    716

    Drill all holes deeper with a 3mm drill. Use as...

    Drill all holes deeper with a 3mm drill. Use as long screws as possible, problem solved :). Add superglue for unbreakable performance.
  25. Replies
    10
    Views
    317

    The bearings in the clutch are broken, change...

    The bearings in the clutch are broken, change them out and use locktight on the nut and you will be good to go again:)
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4