Type: Posts; User: gunny
that motor is the best motor i have had. you will love it. i had it on the supermaxx i built. i did blow the motor though. i hope you are not going to run it in that tranny, unless you have some...
+10000000 i have a 1500mah humo in both of my trucks.
yeah if they dont stay tight that could be bad. are you running a stock motor?
i have the three shoe on my 2.5. works good. you need to see if there is a glaze on the cb and what springs are you using on the shoes?
okay when you buy a pipe and buy an airfilter you will have to richin the mixture. your pipe will alow more exahust out faster. the carb there is a nut on the motor nee to loosen the bolt to take the...
welcome, and +10000000 on what everyone else siad. one thing to look at getting is a hump pack.
try removing your glow plug, hold it upside down and turn the motor over. the motor could be flooded(hold the car upside down). see if that helps you.
i have black springs all the way around i need to get lighter springs they are stiff. im also runing 60wt oil in them
you can buy this pink stuff in a bottle. i dont know what it is called but spray it and then use compressed air to blow it off. then wipe
me to on ue springs
also put the needles back to factory setting also.
check spur and cb mesh. you also could be running to lean. if it revs and dosent want to go. check your gear mesh.
+3 on better shocks then stock. and will also depend on how heavy your truck is. get some ue supershocks. with like 30-50 wt shock oil.
finish break in, then do the pinch test lsn should be 3-5 secs. it happen with me on my 2.5. so finish break in and then adjust the lsn.
here is a link for some connectors
go with the big boers you will like them. as for the resonator pipe you will see a big diffrence. trust me on that.
msr4 are not the best. go with the supershocks or get the ofna ones
will do george thanks for everything. cmckella i might be buying a axeil .28 motor i done know what im going to do with it might keep for the next build. we will have to see if i build another one or...
okay well i went and got a rrp revo spur and that made a diffrence on it running. no problems with it yet. i still need to get a cable to get some video for you guys hopefully i can get that tomorrow...
got mine for 50 bucks off fleabay
+100000000000000000000000000000 cut a hole in the windshield.
is it cold where you are at? because i went threw 3 plugs today just getting the dang thing tuned out i was runing way to lean.
what temps are you running at? try reseting the needles back to factory and see if that helps you out alittle
lol this happen to me when i was moving. and i bought a 42" hd tv. my wife wouldnt let me open it till i got to our new place man did i want to open that box so bad. nothing would work. not even...
thanks wildjones, and i did use the akels has the output shafts. the only problem im runing into is the pins like to fly out of the yolkes. im trying to figure out a fix for this. i might have to use...