Search:

Type: Posts; User: rawvoodoo

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    705

    mine seems to glitch with a losi tx and rx setup....

    mine seems to glitch with a losi tx and rx setup. Everything else is stock. It runs fine... the range is fine, steering is fine, but let it sit idle for a little bit and it goes ..."grrr" and moves...
  2. Replies
    4
    Views
    314

    having a weird problem

    Ok I have a slash and I switched out the tx/rx for a losi 2.4ghz dsm set. I got a strange glitch. Sporadically the truck twitches. Its just the throttle. steering seems fine as does the throttle...
  3. Replies
    13
    Views
    423

    look where the steering links meet the chassis....

    look where the steering links meet the chassis. Sometimes in a head on hit the screwhead will pop out of its little cup making the truck pull to one side. You can easily pop the head back into...
  4. Replies
    19
    Views
    1,074

    I agree. Lok really close way down in the very...

    I agree. Lok really close way down in the very bottom of all the teeth. Any tiny speck will cause clicking take an xacto blade and run it through all the teeth on both the pinon and the spur gear....
  5. Replies
    12
    Views
    458

    for the most part mine only flips on pavement and...

    for the most part mine only flips on pavement and usually lands on its wheels. It sloooozes around corners in the dirt like it was desinged for it or something. I ran it on a clay oval....GREAT and...
  6. Replies
    12
    Views
    458

    like a slice of fried gold on a heaven sandwich ...

    like a slice of fried gold on a heaven sandwich



    ...was that over the top?... I think it was over the top.
  7. Replies
    5
    Views
    768

    as far as I know (and Im sure someone will...

    as far as I know (and Im sure someone will correct me if Im wrong) its 1 amp for every 1000 mah so if you have a 4200 mah batt you could go up to 4 amps a 5000mah can be charged at 5 amps. I think...
  8. I use rust-oleum Clear coat for the stickers I...

    I use rust-oleum Clear coat for the stickers I would think the gloss coat would be best. Krylon makes the stuff too I think. Spray it on the decal (ink side) after you print it but before you apply...
  9. you can do it. I have used the avery clear...

    you can do it. I have used the avery clear address lables before. You have to spray them with some form of clear coat or the ink will run and spot if it gets wet. In the end they didnt look all that...
Results 1 to 9 of 9