Type: Posts; User: Comish
Ah little more detail please.
Is it possible and if so HOW to change the amount of Anti Squat in my Slash 4 x 4 ? Thanks
I really don't understand how that is possible. Then why on my 2 wd traxxas do both the l & r wheel wells have dirt in them.
Shouldn't this be the same as you say for the 4wd ?
I have a Slash 4 x 4 with a STRC conversion kit on it. I'm racing it on a clay oval and I've noticed after the races the inside LEFT side wheel wells front and back are covered with dirt/clay the...
I there a part # available for these Ten T shocks I'm not having any luck finding it. Thanks
Picked up a used 2wd and it doesn't have any shocks on the front. What is the stock part # for these shocks or what kind of shocks is everyone else using? It has pro Line a-arms on it if that...
SNAPPY HOLDER ? ? ? ? Part # and where please? thanks
Use dremel cutting blade and put a slot in head and then take out with regular small screwdriver
First time I can remember wanting to see mailman all he usually brings is bills :-)
Link please for the mod and part Number for the XO 1 and who makes these THANKS
SLW-SVT you have a PM
Shark what type of chassis do you have on your slash ?
Thanks for the pict's exactly what I need broke a ball joint Sunday and knocked me out of the race. Thanks everyone
Yes have dealt with this seller before. Great service. Any change of seeing a picture of how these will work on a 4X 4 or instructions how they go on someplace? Thanks In Advance
Part # and Mfg of WHERE I can get the Stampede 4 x 4 Shock Guards ? Thanks in Advance.
What should the normal length be for the rear Camber Link's ?
Thanks in Advance for your help
Does anyone know if you can just purchase the aluminum end bell off the Velineon 3500 motor. I blew out the end bell bearing and the race is totally seized up and it will not coming out. :mad:
Should the screws holding the sway bar be loose enough to let the bar slide or should it be tight. I've heard it both ways.
I'm sure I will get the same answer here.
Get a set of RPM Lifetime Warranty
What do you use to change the length of your turnbuckles? The wrench that comes with the truck
is so hard to use and doesn't grip on it correct and you can only get about a quarter of a turn. ...
I have a slash 4 x 4 both my front and rear tire on the passenger side my truck have a heavier build up of dirt on the outside 1/3 of the tire. What does this mean?
I race on a road course and was...
I just picked up a ******* 5200 MAH 7.4 V Battery. On the back of it says
never charge above 2C. Why is this?
Can I charge this at 5c I have other mfg. batteries with the same mah and I do...
How would I reuse them? I assumed they are soldered onto the wire. I really can't see the ends of the connectores because the 3 different color wires cover the ends of them where they would connect...
Want to shorten the wires between my Velineon 3500 motor and ESC. What size are the bullet connectors that I will need to do this job. Thanks
Called Traxxas customer support and asked about bearing size. I would of been better asking my 95 year old mother. They told me what ever the spec sheet says that's what it must be. Called back and...