Type: Posts; User: Slash n Bash
My son and I are converting his, when I asked him why? He said its just different from every one elses. Good enuf for me, it also teaches him how to redesign something to fit his own Idea of cool...
tried 14p 86 s still gets hot,oh and I advanced the timing to 18 man is it fast.
anybody else runnig 15t mod motor? what gearing
check this out it pre-dates color http://www.traxxas.com/products/electric/bandit/blueprints/030128_rst_bndt_assy_man.pdf
tried the 14p 90 spur and the motor got hot after 5mins or so.
so from what ive read spur divided by pinion = gear ratio stock is 18p 86s is 4.7 so with a 14p and a 70s I should be close to stock...
also check the pads on the slipper if one is broke or missing it will cause a wobble.
I have 14 pinion and 90 spur I think Ill try those before I go buy any more. What about lowering the spur gear? how does the change the gearing?
bought the15t trinity speed gem tritanite motor and am wondering how to get the gearing close to what it was. any ideas would help, thanks in adv.
I run 9.6v in my slash and it runs fine I use a 18p 86s and no problems
yes ,8 cells do make the motor run hot but the speed gain is worth it, just dont run over 10 min without a cooling period.
I also place mine on blocks and tape throttle on low,let it run a whole 4200mah pack through it and seems to work well after that. also gearing higher than a 18p for anything but speed runs is...
call them and send it back they should warranty it if it was the first time you used it.
what about low voltage cutoff for lipo?
if a brushless motor is a 13t how does that compare to a vxl?
spur gears, shock caps, axle carriers, shock oil and a extra 12t titan,Ihad a motor quit on me at the track and no replacement luckly another racer let me use his spare.
that was cool!!!! hard landing though saw the ziptie on the cam broke loose any thing else?
a smaller pinion helps keep the the motor from over heating
toe nail clippers.
Ive had problems with the titan motors to, Traxxas support said to run two packs through it at at 50% and use a smaller pinion this is after I burnt two motors in two different slashes both of which...
will this work on the stock paint?
Anybody know anything about this charger and why it so much cheaper than similiar units is it because it made in china?...
take a look at these. http://www.outerwears.com/index.asp
Im with you red 6 spur gears and 2 motors since xmas I set the mesh just the way it says to but it just keeps stripping lhs guys were no help maybe someone here has an idea whats going on.
Im up for it already have a idea, now i need a body
he said 40mph w/3s lipo?
the flats fill the whole battery compartment wereas the hump has to have the spacer in it to fill the gap. I prefer flat.