Type: Posts; User: DigDug
My weekend toy. I prefer 2 wheels !!
'05 RMZ 450
By the looks of it without the body on I would say it's a sensor on the drivetrain. Much like Spektrum's telemetry system.
With a plane or heli you still have time to recover before hitting the ground but with a 100mph rc supercar your reaction time will be too slow. By the time you have flipped the trainer switch the...
It could also be a bad steering servo that's causing your problems.
Yea me too. Boring..
If you read a little you'll discover this thread -> http://monster.traxxas.com/showthread.php?t=530104
...which contains the suggestions for improving the ERBE.
Differential Removal Instructions For E-Revo, E-Revo Brushless Edition and Summit
A step-by-step picture guide just for you.
Here you go-
Traxxas Spur Gear 54t 0.8/32p
Robinson Racing 18t Pinion 0.8/32p
Tip - put a little solder on the iron tip when it is up to temp. Hold the iron tip on the copper wire making sure that the solder on the tip is making contact with the wire. This will heat up the...
Just a guess but is the foam sitting properly on the wheel? It will bind on the TX casing if it isn't.
Is it MMM flashing red or flashing yellow? Read this -> Definitive LED meanings
Two and a half men
& Top Gear
Forget the HPI WK. It is junk to say the least. It's the most boring RC I have ever owned. The 1/16 revo is really tiny but super fast. I think the Slash 4x4 has better ground clearance though.
Looks good. That purple can really stands out.
I would just replace them.
How tight was it before it snapped? Maybe tapping the edge of the screw at an angle with a small flat screwdriver will get it turning.
Exactly what I was going to recommend. Hobby King sells BL ducted fans which could work as an electric supercharger.
Also -> http://www.electricsupercharger.com/
Open the transmitter and check if the battery wires were damaged by the acid. The connector that you replaced could also not be making proper contact. Do a continuity test on the connectors and wires...
Yea i'm in South...
I missed that part about the blue screen as well :fear:
Forget the freezer trick. Safe mode, an external enclosure or a Windows repair should work.
How long did you keep it in the freezer? It should be in a tight sealed bag and left in there for about 2 hours. It also helps to run the power and data cables into the freezer with it. That way it...
^ That was already posted by AK SNO RIDER
The answer to this problem was in the very first reply. But anyway..
It's most likely blocked by your proxy or router. Workplaces do that.
Seems nice but since HK's shipping problems started a few months ago, I've stopped ordering from them. They have issues now with shipping lipo's through HKPO. EMS shipping was taking over a month at...
Making (melting) a hole with a small tip soldering iron is a better idea. There will be no sharp edges which could tear later on.