Type: Posts; User: traxxmaxxes
I've used Top Fuel, Maxy's, Trinity, and Blue Thunder. I always come back to PowerMaster 30%.
stability and handling
We could run it at The Farm II
We will have the tire thing figured out by next race. I have J.B. Weld.
P.S. and it's "maybe" :)
it was a 358. He has the M8 with spektrum and had the throttle servo set to apply brakes in failsafe mode. When he left the reciever on it assumed radio failure and appled brakes for 10 minutes...
Have you looked inside the tranny for any messed up gears, slipper still adjusted correctly?? If the slipper has loosened then it will rev all day and not really go anywhere.
Robert would still beat you though.
I used to feel this way then I realized, who has the controller in their hands.
That's who is responsible for the car being upside down to start with.
I used to do this til a friend turned off his transmitter but forgot to turn off the reciever. The failsafe engaged the brakes for 10 minutes while he was turn marshalling. When he returned from...
If your running 40 series wheels I suggest you get either the RD Racing or RPM axle carriers with the larger bearings. Those 40 serries wheels will but a beating on stock bearings
I have seen several running the CRT bodies
the Mugen MBX5 and the GS Storm wing mounts work well. The GS Mount only takes drilling four little holes in the rear tower. No mods needed at all ont he wing mount itself.
In his signature it also says a 150cc tank. Remember if you start runing sanctioned events, in some you'll have to go back down to a 125cc tank. With this said most local club races are "run what ya...
Not for sure if it would be against the rules of this form to offer that service or not. I believe it may be, but would check with a Mod first to make sure,
If you have all the replacement parts lying infront of you on your worktable, the complete engine rebuild, including removing and replacing the engine from Revo, piston, sleeve, rod, crank, bearings,...
$0.99 package of 20 gauge wire
$1.99 package of solderless female connectors
You can build as many as you want then and to the length you want
38T sounds right
I like powermaster 30%. Run it in everything.
Just mount an E-Maxx tranny to your existing Revo (some drilling required as the bolt pattern isn't the same as the Revo's tranny). Remove the fuel tank and receiver box and mount your new battery...
May have actually driven it down to the P.O. to mail it and with the price of gas these days 12.60 for handling could just be a deal.
Just trying to look on the lighter side of it is all. Sounds...
I agree OWB
I have seen some that used an HPI header (for the RS4 I believe) to run a side exhaust setup
Run your engine dry. Then always clean your engine off first before removing the glow plug. If you do as stated above then you will just wash trash and dirt into your motor. WD-40 if you want I...
with a carbon fiber chassis I would advise you to use chassis braces.
Either, or. Doesn't matter. 3.3 starter will work