Type: Posts; User: Shiny
If you ask me I will keep the plastic axels as a week point. Something got to give and it is easer and cheaper to change the axels than the diff or the Transmition.
That is my opinion.
Nice. Awaiting to cool down hear for some series dune bashing.
PS: Hear is the United Arab Emirates. It is hot now.
There is 2 type of paddles 1) withe one paddle across the tier. 2) the other have staggered paddles like half on one side and after few degrees the other half on the other side.
I don't know what...
Thanks. I am on vacation withe the wife now will check it out once backe home
Ok now you got my question. I know but that is no problem, images it this way a wire that have bluest at booth ends, one side in the ESC the other to the battery. And you will have 2 of them + & -....
Ok, thanks for the link. Butt not what I asked.
See the 3 wires for the motor, you can just unplug from the ESC. What I want is to o the same at the battery side. So example a 10 GAW wire that have...
It is their on the motor side, so it is possible.
No not at the end of the wires.
What I mean des older the battery wires from the ESC and solder connectors instead.
So if I want to change the wires all I need is unplug them from the ESC. Like the...
Yes I want to use the motor style bolete connectors on the ESC for the chattery wires.
Any one to comment on my post
Hi, question regarding ESC battery wires for the ERBE (CC MM2).
The battery wires are soldered on the ESC side, is there an issue if I Chang that to bolt connecters, like the motor side. This will...
The issue if the battery's have deferent capacities, for example if we use a 2s 1000 mAh & a 3s 2000 mAh battery's when battery 1 is at 3 volts battery 2 would be at 3.6 volts.
So you will discharge...
Thanks. I tout I mead seance.
When I stated thinking of it that way I understood the amount of power that is stored in the battery, all I can say is respect.
I have a question or a clarification. Just bare withe me please.
For this example I will be using a 3s 5000 mAh battery.
5000 mAh mean milli ampere an hours or 5.0 amps an hours, witch means...
Thanks for the link but that is too much info fro simple question.
Can some one me a simple answer to my question.
Thanks will check the link
1) Hope this was not asked before if it is then pleas past the link.
2) I wanted to post this in electric but only can do it in a sub topic & this is not a sub topic, since I have a ERBE I am...
Just got my ERBE, but from what I gathered on the forum and what I now of real vehicles.
It is abut how your going to use it, for on road and smooth surfers then yahh, it will help you corner...
Ok but why it shows 9 volts. It dos not make sense to me.
Ok now I got it!
It is set at 3.0 volts and showed me to total because I had only one battery connected 3s x 3.0 total 9 volts.
Hi I have the ERBE when connected to the Castle Ling on my PC, the low cutoff is 9 volt. I run on 2x3s for 6 s total. Correct me if I am wrong hear but it should be 19.2 volts(3.2x6).
9 volts is low...
Thanks for your replay
Any one cares to comment.
Hi I have some questions regarding the ERBE.
1) The engine temp sensor should it be fully around the engine or is this ok (pic).
2) The ESC...
I got the CC cap packs and the filed card withe some CC 6.5 connectors.
The capacitors is to refuse the ripple on the ESC.
The cared oh will nice to see what the sittings are plus u can connect it...