Type: Posts; User: dkia01
Ok so im guessing these batts will be toast soon? For the motors I guess I should try a smaller pinion.
Well, the lipos are brand new, they are 5000 mah 20 c. I cant say the brand name here though. IO really dont know what the gearing is, the guy probably told me but I forgot. To me though, the pinion...
I bought a used summit that has 2 brushed motors instead of the one stock motor. The motors really get hot if I go full throttle and smoke. They also got hot to the point of unsoldering themselves....
I think your ESC button is stuck. That is the pattern that happens when your are setting the different driving modes on the ESC. Try to see if it stays pressed when you first try to turn it on.
I found an ebay link with a motor like the 1 in my summit, it looks like its from the 90s....
So how come the top motor had a burning smell? :confused:
Yea, I have a small infrared temp gun from Harbor Freight.
Duratrax modified motors. I think they are vintage, because I haven't found much info about them.
I bought a used summit , and the guy had 2 modified motors in it and was running it on 1 2s lipo, until I could get 2 new ones. Well, I got the lipos a couple of days ago, and just got around to...
So if the the lipos are 5000 mah, it will take 2 hours to charge the lipos. The max output is 5 amp.
I have an Imax B5 charger and was wondering if it is possible to charge 2 lipos at the same time?
Must have hurt when you pooped the can apart.:lol:
I guess thats what I will have to do. Is the handle for the diff lock supposed to move smoothly all the way around? or is there normally a little roughness?
I took off the front bumper so I can get better access to the front of the summit. It seems when I push it by hand, it kind of sticks. It doesn't do one fluid motion. Maybe the trans needs some lube?
Please post a picture:confused:.
What would be wrong with the diff? I can lock it and unlock it by hand just fine.
I have been having trouble with the front diff lock for the past two days. I put a new front diff lock servo and it locked and unlocked fine for the first couple of days. Then after that it would not...
after a charge it is 4.20V, im not sure what they are after I run it.
Yea, I just bought it used and didnt have a 2nd lipo with the same mah. I wanted to try it out :((.
My summit with the Exv 2 goes into LVD after a couple of minutes. The lipo is fully charged and I cant figure out why. The esc blinks red slowly and then the summit starts get slower. I am using a...
Is this type of motor waterproof? here is the link http://imgur.com/ZDhfcFt. 2 of these were installed on my summit when I bought it.
Should I go with a single dewalt or dual?
Okay so I guess the dewalt it is then. Only thing now, is what parts I need to upgrade to avoid carnage.
Okay, thats seems nice. Are there A lot of broken parts?
Is there anything I can do with the sidewinder 3? So I dont have to spend money on another esc.