Type: Posts; User: kamipalms
So what your saying is I can't discuss my .26 PICCO Revo with RPM suspension, HITEC servo's , DYNAMITE clutch ,THS exhaust, TEKNO throttle linkage, MAXIMIZER wheels, PRO LINE tires , SPEKTRUM radio...
Like the sound of the alloy diff cups - any brand better over another?
Another typical Saturday arvo in Western Australia
The spider gear spindle spun inside the cup but the inner gears look ok. The spider gear spindle tore out of its mounting recess in the cup then spun 2/3rds of the way around. in doing this it popped...
Blew my rear diff yesterday and I've herd the E revo diff would be a little stronger.
I run a Picco .26 red dot in my revo and need something that's going to outlast the stock 3.3 diff....
Sick and tired of OWB problems, broken pull start's and ez-start issues so its time to get rid of it all and go bump start.
Can anyone recommend a bump start box that will work along...
Heres another option for you all....
I used a Helicoil ( recoil, thread repair , what ever you would like to call them) and threaded the hub.
Looking into a set of HPI GT Tire S Compound Savage tires
A wet Saturday with 3 x 3.3 revos
Its been a while fellas but here's a couple for ya-
Happy new year to all from down under
Tower hobbies, A main hobbies, Ebay and RC Planet are all pretty good
here you go , A FEW TO CHOOSE FROM
Just stick with the stock one and if you want to , up grade the wheels to the Traxxas alloys...
+ 5 on the RPM gear- you only need to buy it once
The DX3R for sure - not the cheapest but well worth every penny.
Most hex drivers are hardened steel so they do wear just enough to start stripping hexes. Titanium is a lot harder so they will last a lot longer but they will still wear
what about the cups ( the bits that go either side of the diff housing) their not in the photo or description ?
sounds like youre running an aftermarket headder/exhaust as the stock headder is bolted on
$120.00 .......even if it had no engine I'd still pay $120.00 for it!
Any dual disc configuration will work better than the single disc. The 12mm hub in the first link will be fine , just make sure you loctite the grub screw when you fit it . If it comes loose you will...
First off I'd like to say ....
Another West Aussie! .... welcome !
you'll love the Picco , so much easier than the 3.3 ( don't get me wrong , I still love the 3.3 as well) and still plenty of...
The single mounting point on the right hand side is a bit of a weak point.
heres something I posted a while ago you might find usefull
Have you tried M2C Racing or MIP ?
they both make an upgraded stock replacement and I don't thhing their that expensive either.
i'm running the MIP stock behing a Picco Red dot and its holding up...
Man I wish shipping was a lot cheaper. I'd snap it up :(