Type: Posts; User: bashaslash
Same here, mines not the trim.
Must be torque steer, what causes it and how do I make it go away.
Pm sent,fingers crossed.
good tip, I have used torx bits to get them out before,find one thats just barely too big and tap it in,but you gotta hold the bit perfectly still cause once it loses its bite, your done. I'd try the...
We race on a clay track.
So everybody uses stock tires?
Anybody got a link for a spring rate chart that is color coded?
Hey I see lots of threads on revo but hardly no info on slash.
What else fits these,what would you recommend for a fairly flat packed clay track?
I am looking at the rear buggy dirt hawg but am...
I have faced this problem with mip on my honcho, a drill bit cut down to the right length is the ticket,and made of super hard metal. Just use the shank,not the actual drilling side.
I see, its got its place,ill be just tighten them just right and checking them after every run,helps me find broken parts anyway.
Rock on though, no hating here.
Does anyone know the size of the all thread needed for the mini revo rod end TRA7059?
I know some body has a spare set of them they don't need.
How long will 2200 2s in parallel last?
I got the dynam supermate dc6,for 30.00 with the balance boards and a $#!t pot of leads.
Thanks, I think ill set my personal limit to 2c until I gain some experience with this.
Batteries ain't cheap,and I especially don't want to burn my house down.
These are the batteries that got me...
"They" are saying that it softens the plastic due to the chemical reaction of the locktite when it cures.
Mostly go slow guys over there,but alot of good info. They beat on stuff pretty hard on the...
I do occasionally hear a static like noise that comes from my esc,but till she smokes,I'm running it.
I seen it over on rc crawler forum.
I remember when all the crawler guys was the same way about the wraith. Now their dumping them off for maybe half what they got in them.
Thats when ill get my xo-1,when the "Jones's" sell them off...
I have always understood not to use threadlock on plastics because it softens them making the threads weaker. JMO.
I do use it on all metal to metal connections.
Ive heard somewhere that the 2.4 digital radio isn't compatible with the analog servo,like the hitec,causing glitches.
Is this true?
So a 1000mah 3 cell with a 5c charge rate max can handle 5.0 amps, does this mean I have to charge at 5c or just gives me the freedom to do so? Is this better or worse for the battery,or just...
Thanks for the replies, the dc6 is faster shipping so I guess it wins.
3s here I come.
******* **** tech a good battery.
What does 5c charge rate mean?
I'm looking to get a Lipo charger,looking at either the IMAX b6 or the dynam dc6. Any thoughts or concerns. Roughly the same price.
Just what it says, upgraded ok just need it to be super cheap.