Type: Posts; User: bdion626
Okay so were working on a project with 2 motors / 2 escs (brushless) into 1 TQ1 receiver
is it possible to Y connect the ESC's into the ch1 port on the receiver and make it work?
As stated above. No batteries are water proof but I've never had an issue
Ok sorry it took me awhile to get this up. But the new batteries work great. Esc is running cooler. It's got more power and increased run time a little. Witch I was not exspecting added run time
I run thunder power 11.1 5000 nah 70c batteries. And mine actually runs cooler with those batteries then it does with 25 c. Because the esc isn't snuggling for power. Plus they perform better
Can u post of specs for some reason every time I log into that forum it takes me to home page. I can't get to the link
Right im getting the same results but since ive noticed the charging issue their discharging alot quicker when I discovered it it was after a charge on the usb and it read 4.28 witch in...
Im getting about 10 mins sometimes less now but I had a motor go out on me today after about 20-25 flights so im gonna give traxxas a call tomarrow
And I use the usb charger cause I have a...
Well I bought a new alias along with 3 extra batteries and notcied after a few cycles on each battery I was losing more and more fly time so I started to watch my voltage with a lipo checker to...
Kintecracing.com has them
Right and chances are i will get the seaking 180amp. more then anything i want this post to really wake some people up in the lighting of "C" Rating. And its always worth the money for a higher C...
Tarheelslash im sending you a PM check inbox
Ok guys this is alot of information here to gram in so Follow me on this
We all know Spartan's ESC over heats, and we've all been fighting this issue to come up with a solution
Now one easy...
Maybe try different battery packs or recharge your battery packs and try it.
But thats a long shot.
Chances are its gonna be a ESC issue
But easy to trouble shoot. Do you have any other motors...
Could be ur motor coupler worn it wrong size the other thing I would check is the drive cable easy diagnoses here power it on and give it throttle if the drive cable isnt spinning then its...
ok thats what im gonna go with the only prop im gonna work with now is the one from kintec that is stock pitch and everything its just stainless steel im happy with the stock speed and performance,...
I run 6s. Stock everything besides standard cooling mods. I just want a safe reliable 6s. System to where I can run it with out worrying about it or taking a week out of my running season to deal...
Ok well tell me if the sea king 180amp on kintec would work with stock motor and is it worth the money
I dont mind the work lol
But the million dollar question is Is it worth it?
they offer a remote control Trim tabs.. http://kintecracing.com/Trim_Tabs.html
has anyone used these before and do you just hook them up using servos
ok is it worth it? and does it help with chine at all?
if you could would you be willing to throw up some pictures
Also im gonna PM you my phone number maybe you can call and go over some ideas with me
Yeah hog, I was just coming to this thread to see if you guys would recommend the direct replacement dual pick up rudder from kintec
Or if you guys would recommend the longer dual pick up...
Ok thanks bud
Im looking for a few things but cant seem to find them
1. Looking for fittings to go around my water tubes where the hole is drilled in the transom ive seen a few pictures with people who use them...
Please repost pictures im thinking about this mod as well