Type: Posts; User: Daddykins
Keep ur motor and change the esc.
Lipo before the esc is good also.
You'd be surprise on what Lipo n an mmp can do.
Loving the lower cog. Curious on whether the micro esc will have a better punch compared to what you have on there now.
Thanks for sharing.
Looking forward to the outcome.
Traxxas Lipo has traxxas connector stock. SPC has it with Traxxas connector as well.
The traxxas Lipo is 2200mah & SPC is 2500mah.
Both of these are good and can't go wrong.
Looks good! Great job on the led's.
Have you thought about the shorter A arms & sway kit?
There's something about these minis that I enjoy more than the bigger ones. That's just me I guess.
3s was crazy fast the first time I tried it. Lamp pole almost ran in front of my merv.
Thank you for those wonderful pics of that BEAST!!
Is it only with the HR steel gears you needed to grind down the trans case?
Loving the look and theme you went with.
Bulkhead is the plastic housing that houses the differential gear and pinion.
You Probally need part # 7079 but take it apart and keeps things organize the way you're taking out and the opposite...
Go to http://www.teamstrc.com/index.php?route=product/category&path=53_40&page=3
You can get the single arm or cut one side off of the saver itself.
+1 for checking pillow ball retainers.
Try backing off a bit more and see how it does.
You'll have to shim both side of the ringgear and the pinion as well.
Jimmie's shim guide works in the same way. Getting the mesh just right
After I installed the hr bulkheads I converted it to a...
I run without a tbone ever since going with the hr bulkheads.
They come with some shims also so you'll need to shim them.
I also use the front and rear chassis braces.
Thanks for sharing those vids. 2 summits barely broke a sweat.
If your after speed and deciding to use 4s after, I'd spend the extra money on a mmax pro.
Especially spending $170 on a neu motor.
Thanks for the great review and feedback
I'm currently using 7033x, GH and HR.
7033x does back off overtime like GH. I use plumbers tape on the threads to keep them tightly fit in place better. ...
Just by curiosity, is your adapter a Apple brand one?
I enjoy watching your transformation on your rigs
Nice job. Looks better with that body.
Maybe try a 50T spur gear or even the 55T for now to get it to mesh.
Unless your set on the reccomended gearing.
are you able to fit bigger wires through the doors? Without cutting the doors.
Unscrew the slipper nut off n pry off.
If you have another spur gear than it'll just slip right in.
The one you have is Probally filled with melted plastic from the spur or from the slipper pads...
It's a good thing if you can actually still use the app.
Some other apps you just can't open them
Just gotta wait til an update is available, most likely.
No wing included with that body.
Just that you listed it twice.
The exo carbon one does look really nice tho.
Those prices are crazy cheap.
I did a merv to rally conversion also but with...
Nice choice on the body.
But you only need 1 wing
DC983KA Type 1 14.4V DRILL/DRIVER
DC984KA Type 1 14.4V HAMMERDRILL
It's going to squeeze out some when you put the plastic cover back on.
I don't know what's stock off hand but one is 30k n the other 50k
I just use 50k to save the trouble of keeping track cos I...
Could be a stripped screw.
Don't over tighten those 3 screws for the caps cos it binds
I back off a bit when it's fully tighten.