Type: Posts; User: PBR Street
Looking for some advice. I've been having battery puffing issues when using 3s Lipos.
Just one side will puff. Happened 3 times. Getting expensive.
Understand it likely is related...
I'll try both of those. The bulkhead is broken so not worried about going to town on it. Really hoping to save the rocker and bearings.
Rocker arm is stuck on the post. Also post stuck in the bulk. Turns freely on the bearings but thing will not slide of the post at all.
Any thoughts on how to work this puppy free? The other...
I live in Manhattan so don't get to take the car out often...but when I do things are bound to happen.
Run 1 yielded broken knuckle.
Run 2 yielded broken rear bulk
Run 3 yield broken front bulk...
Curious, wouldn't a brace largely eliminate the shock ratings?
What weight are the stock springs?
I didn't. Just the axle part. Sorry don't know the terminology. Where you shim to push the larger gear against the pinion.
I tried the pinion and it seemed to grind more than without. Tried 1-3...
I don't think the casing would allow a third. Tight getting set between bearing and case. Turns freely and feels smooth.
Also I only shimmed the axle side and not the center pinion. Should I do both?
How many shims do you guys run in your rear and front diffs? I just put 2 in rear. Sufficient?
50k diff lube rear. Heavy enough? Stock is 30?
Good input. Thanks guys.
That roll cage is no joke.
I'm thinking about getting the aluminum bulkhead but am slightly concerned about rear weight. Not concerned about overall weight as it's so light v its power.
Any thoughts from the community regarding rear bulkhead upgrades or mods (in other areas) to minimize breakage?
My second run ever I managed to break my rear on a frozen turf divot.
Good stuff. Many thanks. Like the east look of the tor-x set-up.
Thoughts on bracing in general? Really don't want to break the chassis or bulkhead as they are a pain in but to replace.
Anyone have thoughts regarding the rear chassis brace mod?
Helpful in stiffening the rear any?
I've seen a few mods using a steel pushrod mounted from the shock tower to wing mount.
Thanks all. I'll give them a ring.
Definitely tried to seat it as tightly as I could ( within reason) and attempted to plug in both ways multiple times.
No response or power up in any of those attempts. Triple confirmed was using...
Does anyone have experience with the castle field link? Trying to determine if mine is defective or if I'm just being an idiot.
The field link card is not getting any power (no lights or...
Wow. That's a long rc list.
My wife is starting to ask why all these boxes are arriving daily.
I did get a nitro for my brother but way to much work for this novice.
Back on topic I got the...
Man, this **** hobby adds up $$$. I had no idea what I was getting into but strangely can't seem to stop myself.
Thanks Tex. good intel.
Is there a way to manually adjust without castle link?
Looks easy...sadly not compatible with Mac.
So no other way to adjust except via castle link I take it.
Is there a way to adjust this via the TQI app? Same as throttle sensitivity?