Type: Posts; User: Swampthing
Wilmar Performance Tool W80275 Metric T-Handle Hex Key Set, 10-Piece https://www.amazon.com/dp/B000X282TG/ref=cm_sw_r_cp_api_.yi3ybNRZ7QYA
But you should just get these:
Moore's Ideal Products...
Went to a different park on 3S was going well until I jumped an embankment and didn't realize the other side was a ditch full of nasty water. Landed right in the middle of it. Glad they are...
Had an absolute blast. Had a great run on 2S yesterday but some of the hinge pins on the arms and shoulder screws on the upper shock mounts started backing out so I brought it home. Put a drop of...
Unplug the servo and see if the throttle works normally without the servo. Sounds like the common servo outrage to me. I replaced it with the savox many others use and have had no issues since.
Bring back the Sledgehammer! I can see the name repurposed for the crawler.
Mine sounds the same then.
I'm planning on grabbing one too...and immediately going brushless [emoji1303]
That sounds like the brake on my Castle Sidewinder sct/3800 combo. Is that what you are running? I think it's a normal sound.
Mine had a ton of slop just like Gunners. MIP replaced all the bones and they still had slop. I ultimately returned them...
If you don't have the Slash Ultimate take a look at the Tekno axels. They come with new carriers and bigger bearings. Otherwise I have the Traxxas brand cvds and they have been solid for me. Many...
Check the screws that hold the esc to the chassis. One of them likes to poke through into the battery tray and will make contact with the battery and tear the case on it. Just back the one that...
Heck yeah! A few threads on this already. Most people seem excited. I sure am. Already planning a brushless upgrade!
I'm thrilled. Just gonna hold out for a VXL model.
I'm excited, I bet they bring out a VXL model in the not to distant future.
Yessssss! I'm so happy!!! Just got the email from Traxxas!
So the OP only has one post, to tell us he crashed it a bunch then lost it. I'm curios to know if Sum has this guys Aton or not!
Looking at the still from the video and comparing it to this, the body lines don't match up...can't be the same vehicle! Thank god!
Just looked through the pictures on the Traxxas website and noticed a new center drive shaft...interesting...
Sure hope not. Still holding out for a dedicated street platform that is 1/10th scale and cheaper than X-01.
I like how the proline mounts sandwich the body down and it doesn't rattle all over the place
yes, that is what I use.
I do this as well. Never stripped a spur...
I use auto-lipo set to 3.5v/cell
I think default is 3.2v/cell which i think is a little low.
As for the rest of the settings, mine is all default for now.
Caster blocks and shocks caps are really the only two must have aluminum parts in my book. Maybe the front bearing carriers, but I have RPM there on mine along with the rear carriers and A arms. Been...
I'd keep it. The old VXL system isn't powerful enough for the 4x4 Pede in my opinion.