Type: Posts; User: Emmanuel15
Anibody is using this sway bar
Hello i run my slash in 3S and switched to 32pitch for durability spur gear is Hot racing metal 58T I used a 10T robinson pinion who lasted 10mn before to be completely eaten by the spur , i used a...
Proline switch grass
Yep the locknut was a beat loose on the side where it hapens, should i use locktite on the axle.
Hello guys i m running aluminium hexes and prolines epics rims or traxxas rims, the problem is since i loked the diferential , i m using a spool , after few runs the hexes are starting to turn in the...
Ok but it s only one month old do you thi,k Traxxas will take it under waranty , look like they hava an office in england that will probably be shipper to send it there from France.
Hello guys what should i do , the day before everithing was find and this morning i turned it on and after 30sec it started to smoke , i don t understand , i haven t change anything from normal usage...
Wouhaoooo i m impressed really good stuff
Go for the 3000KV if uou want to run 3S , but if you run only 2S max go for the 9T 4300KV i have one for a Year and geared 23X86 it s going up to 60KM/H Went in water , under the rain , and it still...
yep i had exactly the same problem since i replaced the axles nut by aluminium ones no more striping.
But if you run 3S Hard you need to watch the pin on the input shaft (i drilled and replace by a...
Here is the good link
My Slash with the new combo Xerun80A ESC / VELINEON 3500 / ******* 3S 58000mah / FastLaneMachine new CVD's
Depens what you call speed .
With the lead/body on after 50mph it s taking off ,to much wind getting under the body.
After without the body , there is no speed limit really.
Hello guys i just received this this morning
The diametre of the axle is normal my bearings fits perfectly , but compare thane the old one ,...
The dirt paw are wonderful they hook up like crazy in the dirt , even in the snow they aregood as sand paddles.
The only down side is wear pretty quick and no traction at all on the road.
Proline epic with Badlands , the best bashing setup , just few spot of glue on the rim and roll!!!!
No they fit in the normal bearings, no needs to change the bearings , you just have to drill a little bit the rim hole.
Yep the new model with the strong axle , just need to retouch a beat the inside of the rim hole and it fit perfectly, yes my clutch is completely locked...
I had the same problem in 3S with velineon and xerun esc but since i baught the new FLM cvds it s a dream , no more schafts problems, but a broken differential .
Here they are , they handle like a dream
OK i v got FLM by mail and ordered them from FLM .
Hello guys thanks for your help ,
Yeti as3 what do you mean by "prob 9 heats and 3 mains on mine with no problems at all"
Try to find some but it s really hard if you know a place let me know ...
Hello guys where can i find some FLM cvds for my Slash , since im in 3S lipo my plastic ones are braking non stop.
Look s like the FLM are out of stock everiwhere; help me please.
Ok i v got the sidewinder + a fan on it , it works pretty well .
Velineon with 23X90 = 50mph with a lot s of torque perfect for the Slash on 3S
yep i think i may order this one xerun150A