Type: Posts; User: pede46
how's your weather? if its cold out you may have to richen you HSN to get it to fire
ya i didnt realize this post is from 2001, good call lol
or go with a heavier shock oil in the rear shocks, stiff rear end = no sag at acceleration = wheelies
maybe i'll rip it apart give it a good cleaning, make sure everything is air tight
ya but once its warmed if fires right up, we dont have to let it cool to get it started again
so even after running like a champ for 5-10 minutes it still means the engine is shot?
my brother has the 2.5R rustler, the other day after running fine previous to this we went out to the track and his ruster is so gutless, runs like a bat for first 5 mins but once is starts getting...
anybody know the right part number for the clutch bell bearing for the 2.5r?
ya, i didnt pay attention to the date lol
thought i would tinker around with lowering the body of the pede, what i did was remove the rear body mount and i bought the rustler front mount, so pretty much the same set up at the rustler but you...
maybe try getting a job
ive tore threw so many rubber tips, rear exhaust SUCKS!
having the end cap on your antenna will do wonders.
i made my pede into what i think it a racing pede, all i did was get some rpm front and rear a-arms, front and rear progressive springs and traxxas 4485 side exhaust, and i beat my brothers stock...
1 - 30wt and progressive springs are a must
2 - mashers i don't know, never used them. The stock rubber are good all around terrain
3 - my inline filter is around the area of the starter for the ez...
i have a nitro stampede and my brother has a nitro rustler, nitro rustler will fly for sure but on our track, he can't touch my stampede
you can buy all the wires for like 4 bucks haha
lean your hsn out a little bit more, the leaner it is the more power you will have, but be cautious make sure you always a have a bit of blue smoke coming out the exhaust
same as everyone above, is that doesnt work adjust your low speed on the end of your carb, turn it a little at a time or you will wreck you needle
and if that isn't the issue loosen your engine mounts and re-adjust the clutch bell to the spur gear, and no you cant over tighten the slipper clutch, easy to set, tighten it as much as you can and...
yeah the backbone is the same, you have to take the top body mount off the pede to put the rustler body on
using fuel tubing doesn't work, it will lower the pede, i did this because i was tired of rollovers, as i am trying different silicone weight, first thing that happened when i dis-assembled the...
ive had my trx .15 since 07 and it runs like the day i got it