Why front wheel drive??
Type: Posts; User: ratpower396
Why front wheel drive??
Just wondering what esc you are running for the dewalt conversions & please list battery & performance if possible.. Thanks
how did you get 8400mah of nimh battery??
motor spec sheet states 90a surge & 50 a continuous
How much amperage does a pair (14 cells) of 6 cell 5000mah elite battery packs deliver?? I am having a little issue with my truck stuttering not when I first take off but shortly after it gets...
Batteries dont get hot just warm and Ill have to check but I think i turned the settings down already..
I have been having an issue with my esc that when driving it acts like i let go of the throttle and then it gets going again but not from the start the truck will be running then just quit and get...
the diff oil will be more forgiving on the diffs because of the minimal slip it will give.. The spools will snap shafts or the spool itself would break under heavy pressure & no slip..
now old style I believe he means the non widemaxx version.. I havnt heard of too many of them around anymore..
dont really see the need for 2 servos per side one single servo like a 645mg has plenty of torque to steer so why not just use 1 servo per side??
you say in the post "This trend isn't about the E-Maxx and showing what it can do. It's about getting trucktrial's trend sticky." but in the very first post that you made you said"So what I ask for...
why not use the parts from the front to make it rear wheel drive again??
a few companies make 100000wt & ofna makes 120000wt oils on towerhobbies.com
why not just use the heavy diff lock fluid in the rear diff?? it will just about lock it but on road still give a little??
If you are going to make the truck brushless why not just get the brushless version & learn to drive it??? It seems kinda foolish to buy something & put hundreds more into it to make it basically the...
why not just get some new batteries & run it to see how it does?? You might like it the way it is with new batteries & not wind up spending money you dont need to spend to have fun..
why is it that people buy a 3906 & spend the money to change it to a 3905 when they could have just bought a 3905 in the first place???
i drilled a small hole through the bulkhead where the allen wrench needs to go & it kept the wrench straight & didnt weaken the bulks either.. Sorry dont have any pics at the moment..
how are you going to keep the lipos waterproof??
the kv rating is on the high side so just gear it right & keep an eye on the temps..
why not just run 1 battery per esc instead of using the unslow harness?? Unless the double mah is what you are looking for..
$90 is a bit steep just to do jumps isnt it???
must be an omen that tower hobbies is showing it as discontinued as of 5/6/2010
if you are putting this setup into a stock esavage get ready to chew up the stock driveline.. i had an ammo 2600kv brushless in my old esavage & blew both diffs in a very short time.. got rid of it &...