Type: Posts; User: keys1222
Did the power up deal. Im still running the stock battery and a 5k mA
Finally upgraded to brushless and man what a difference. What gearing seems to run the best for just running around? Have 19/86 now
i was trying to get that hot! noticed before that it didnt have the power anymore so i seen what it could handle! Tall grass and full throttle starts to get it that hot
Heres my responces
Well my Titan got just alittle too hot last night (200 deg on the comm outside the housing) :eek:. Still runs but at maybe 50% power if that. Tried cleaning the comm and no go still the same. Good...
i found on here to use a q-tip with the cotton removed with a piece of sandpaper wrapped around it cleans the comm really good. spray it down with electrical cleaner, and re-oil it and have run my my...
Thanks guys! looks like im on the search for them both
I need pros and cons of the following parts:
Need left side Steering block and Castor Blocks
Stock vs. RPM
RPM vs. Alum.
Traxxas alum. vs Other Alum.
Thanks for the tip. tried it last nite on my old motor and runs pretty good! doesn't have the top speed as before but still able to bash the motor!
Ran 17/86 last nite and ran it hard and couldn't get it hot! got some speed back so I'll run this and see how it works out for me. thanks everyone for you input
yes i have. but the whole "drive it like i stole it" is hard to get away from
Thanks guys. i figured that more opinions the better. good thing i bought the 17T and 18T pinion along with a new 86T Spur
But how much do you notice dropping just one tooth on the pinion? or should i drop more to really notice anything?
I have looked up on here the best gear combo for a p2de after burning up the original motor with the factory gearing. Switched to a 16/86 and couldnt get the motor hot which is great but want more...
i just bought a summit front harness and ran it off a 9V battery. mounted them with holders i got from radio shack. friend tried making his and hes had a headache with burning up the leds
Thanks for the replies guys.
Yep lower hole!
Thinking of getting an alum case but dont know if i can use a gear cover with it
Almost like tire glue then? ill have to see if the LHS has it. not the best selection of anything
Whats CA? im may not be that smart
Stripped the threads on my pinion cover :eek: and wondered if anyone had any tricks to repair the hole
The 5-fin works on my titan pretty good. modified the outer sleeve around the motor so it wouldnt block the slots in the motor
please tell me more about the outerwear your talking about
roberz00 didnt mean to jack your thread but i did the same thing!
i have a temp lead for my volt meter that ive been using and havent got over 130deg. heat sink seems to help too. ...