Type: Posts; User: Dougrevo33
Lots of new goodies on mine.
RPM Tru Tracs rear, RPM front A-Arms, Badland tires, SPI Pro-Stock racing...
X2 on the True track
While I was waiting for my backplate I used the plastic cover off of a pullstart.
I cut the cord off and plugged the rope hole with a screw and silicone.
It worked pretty good.
Good find. Hope you enjoy it.
Me messing around.
Not yet Skyline. Waiting for a tranny gear to come in before I can run it again. The graphite ones you are using look like they would work pretty good too.
I went back to the longer screws that...
Did you do the steering mod from the traxxas website?
On board temp gauge, close-ratio Two-Speed Gear Set and a DX3R.
Three mods I am very happy with.
Using the plastic one so far with no issues, but I like that one better. Wonder if the heat buildup could melt that plastic one. Great idea.
I can't tell any difference...
.27 big block installed here.
You need the engine mouint for the Sirio .27RX. The TX...
Kept having problems with my rear brake kit. The composite brake keeps eating out the center part of the 2 disks that slide over the cross hub.
Well, long story short, you can buy a stainless...
For about 5 bucks, you can get a one way bearing tool. It presses the inner bearing out and allows you to replace it.
I like the SPI racing wheels, they have a lifetime guarantee.
A vice and a hammer will fix you right up.
Two thumbs up!
Gearing, T-Maxx will smoke you on the start of a drag race.
On the track is another story.
Most excellent. Great idea.
Simple test to see if it is clogged. Disconnect the fuel hose from the engine.
Pull the hose off the exhaust pipe and blow into it. It will pressurize and fuel should pour out of the line to the...
Here is our gang messing around yesterday
Really nice REVO. You'll love the Picco 28.
No disrespect intended, but , keep it simple, throttle servo moves a small rod that opens and closes the carb.
Bend, tweek, bite, hammer and twist that rod and/or align your carb until it opens and...
The one way bearing aways seems to fail at the worst possible time.
New Years lid
I know its a swear word around here but Integy makes a decent aluminum one. They have the fuel line holder clips too.
It has held up pretty good so far.
They call it a Alloy Roll Handle....