Type: Posts; User: razzgold
I am having the same issue, anyone have luck figuring this one out?
You might want to go lean.
I had the same issue a few times. Once it was the o-ring and another time I was running way too rich on both the lsn and hsn. Go back go factory defaults on the...
Yup sounds familiar. Please let us know if the extended caps work for you as well
The extended cups worked for me. No more shafts coming out after a few jumps.
I thought about tightening the pivot balls but my alignment is great I didn't want to mess it up.
You can make the truck lower by putting the rods in the hole closer to the wheels.
I have RPM arms as well and with the extended caps look like its a better fit.
Yup. Thanks again guys
It was the o-ring
I have that same issue with the CVD shafts. I am going to try the 5153r today.
If you read the paper that comes with the CVDs there are a few tips there
I tried richening the HS already no go.
What do you mean by air tight? Check the motor for air leaks?
My Revo has been running pretty good lately but today I ran into a problem and spent some time on it and got no where.
The truck starts up just fine and I let it run for a min for...
Thought so thanks guys.
Hey guys. When I punch full throttle the truck will speed up fine but shortly after it kicks into second gear the engine hesitates or sputters like its going to stall. Sometimes it will stall and...
I have the big joes as well but I like running them in the snow only.
The stock tires are good but the wear out fast.
Can anyone suggest good set for both the street and off road?
Yes I finally got around to it and I played with the 5338r toe links made them a bit longer and good to go.
My front left rim was also bent swapped to the back.
Thanks for the help guys.
The turnbuckles on the steering servos?
I do have the 5338.. I'll give it another shot tonight.
Thanks for the tips guys
I did that already no go
oh sorry about.
Here it is, look at my front tires :(
Can anyone give me any pointers on fixing this?
I just finished rebuilding the front after a bad accident.
I had the same thing a few weeks back and it was running too lean
I should have got a pic under the hood
Hey JT I have the same issue after driving it in the snow.
Did you figure out what the issue was?
Might be snow related? Most if the car was covered with snow
Yes worked well
Thanks for the pointing out the tip
That makes sense I will try that out. I didn't think about the servo horns
if that works i will be be back to thank you :)
I know I am a NOOB, but I promise I gave it an honest effort and time trying to figure this out but I finally gave up.
My Revo 3.3 is pulling to the right. No matter what I do trying to adjust the...