Type: Posts; User: mervraptor22
Sounds good I might try the esc crusty suggested I'll let you guys kno how it goes
Well it was working fine on 3s then it started doing it again and my motor and esc were hot I just put new tires on so I'll prolly have to gear down
Will the stock motor handle 3s or should I just get a esc/motor combo?
I'm looking for a set up I can run 2 3s in parallel, my motor is fine but esc is shot so time to upgrade, or is there a esc I can get while this motor runs?
So my merv has been acting weird will fully charged battery's (lipos) 2s and 3s if I give it full throttle itwont go it stutters but when I give it a lil throttle at a time it will take off and go...
Third that ^^^
2s for wheelies, ive done wheelies for a whole block
the spc 2500mahs are 30c
try 23p and 50t just watch temps those beadlocks add alot of weight, i run 28/45 on 3s and 2s parallel and temps are ok with some grass/dirt play
spc 2s 2500mah lipos for the win
Sorry but I just check and I connected the yellow and white leads to the motor backwards I just didn't look very well
It was the battery wire that broke
How do u change it with the transmitter?
So my merv kept cutting out so I checked the wires from the esc and the wire was broken so when I was repairing it i shorted the positive and negative on the plug and saw a lil spark nothing was...
I'd toss it and get some spc 2s lipos 2500 mah for 20 a piece
I run a 28t pin and 45 spur my gps clocked it goin 40 exactly but it was after running it for 20 plus min of hard running, I used 2 2s spc lipos in parralel
spc 2500mah 2s best ones out way better then the traxxas ones i paid over doubled for
yea i only sprayed the inside it just flaked away tho i might just do black all over now
i usually put a ice pack under my body it keeps everything pretty cool
I've had to clean up this thread and those that commented you know who you are. If you have problems with the price or the item for sale, then either take it to the PM's or refuse from commenting...
wat paint do you use?
i want to get some 1/10 scale tires will they fit or do i need some adapters?
with my set-up i do 40 plus per gps and alot of wheelies
id try the 55t or 60t spur, i think ur gonna have heat problems anyways if u run them in series, id just run them parallel and u could put the stock pinion back on and run a 50 spur, i run a 28t...
spc makes a 2500mah 2s that fits good, u just need to trim about a quarter inch off the door, and lipos are the best