Type: Posts; User: InFlames
I love my True-track in the rear and the a-arms in front.
I believe this fix was meant for those that DON`T have the M2CŽs ;)
He has a largecale 1/5, 1/6 car.
Thought I read somewhere about this before....hehe
Then I noticed your name ;)
With 30% OŽDonnell I run with the OŽDonnell Purple medium/cold glowplug
What fuel do you use?
It might be a relevant question when discussing glowplugs....
Same as stock (blue) pipe?
(or did I misunderstood you?)
The resonator adds some punch.
Also a diffrent sound.
It takes time for the fuel to get to the carb through the fuel-line.
I use to loosen up the fuel line from the pipe and blow carefully in the fuel line until I can see the fuel is right outside the...
No, turn the screw IN (clockwise). To lean the motor and get it to shift to second gear
Have you turned the high speed needle in ?
Just loosen the old ones from the car and replace them.
Nothing difficult there.
Pivot balls are in the carriers. There they will stay ;)
Edit...you mean Pillow balls?
I use OŽDonnell 25% to my STS .28 Revo
A very good servo at fair cost.
Use a regular http://tbn1.google.com/images?q=tbn:LKbNYk1UxGtp-M:http://www.lindqvist-msk.com/prdbilder/sma/78564.jpg
And a http://www.lindqvist-msk.com/prdbilder/77553.jpg
I do, cuz I have the...
Strange that people hang here but does not know how to get a proper exploded view, manual or likely of their cars.
Traxxas.com holds every tiny piece in pdfŽs of any of their cars...
I have a 12v 9A battery. Works good in my RD Logics box.
Get one like that and forget about charging it every time you are going to the track
naah, I have a converted 3.3.
Runs on 4S Polyquest with direct drive from pinion to spur and are a huge speedmonster.
Only thing I did was to loosen up the bolt in transmission for earlier shift to...
Use a XL motor for a revo.
I have a Feigao 9XL
No offence but....I believe there are a couple of this threads around.
Or you can just go from page to page and read about peoples threads about broken stuff.
I run the 3.3 chassi.
You asked if anyone did the conversion of a Revo.
I did that.
Movie and setup is here
Tekno RC, RC-Monster and Impakt RC has got some convert-stuff for you.
Would it be even better to get the aluminium cups to go with the e-revo diffs then?
Cuz I have twisted a original cup inside with my 4S converted 3.3 e-revo.
You got a point there man :D
Although I am currently working on both of my Revos ( one converted 3.3 to a BL e-Revo and one BigBlock Revo)