Type: Posts; User: Mohnston
I don't do it to my good packs and never did it before to this pack, I was just curious to see what the pack could pull. Not very much apparently
it works if you dont jump but if you do and you land on the back, say goodbye
My xtreme carbon chassis broke once but it was fixable, all in all it has been pretty good as I really dont baby the truck
Stock slash with the stock 550 12T.. I've been running the pack through a few discharge/charge cycles and it looks like cell 2 will loose its voltage very quickly and the pack cuts out at about...
Sounds like junk! There are lots of good chargers out there, some require external power supply's some have built in units
Ya thats what I was thinking was the pack is dead. I was just hoping for another answer haha. I do run a LVA on there, the novak 2s smart stop. Which peeps say doesn't work, and didn't work until...
The battery is fully charged, or so says the EQ2 and when I put it back on charge @ 8A it only takes about 1000 - 2000 mHa and says its at the 4.2v mark on both cells. The pack only would have about...
Anybody think of a reason when I run my Thunder power 8000mHa 22C 7.4v 2S Lipo the truck loses power after about 10min? Battery voltage is 3.7v ish per cell when the truck is too dead to move.
Wow I am impressed. I have worked with the liquid mask a bunch and with that level of detail it must have been quite the process. Good work!
Some of you take this waay too serious and I think forget that this is a hobby for all types. It's his toy and he did what he wanted. Good on ya buddy, keep the videos coming!
far as I could tell there isnt any easy way to make them work together. you have to replace the stub axle on the stock shafts. the summit shafts the yoke to shaft is all one piece. if anybody can...
FYI for anybody looking to run Summit shafts with the Tekno Axle Carriers. They do not fit together. I decided to run the summit shafts instead since the carriers rarely break but the drive shafts...
yup, busted shaft. I likes my tires all ballooned like that.. haha next set are getting taped fo'sho..
I was seeing how many flips it would do if I kept it pinned, by the time I let off it had...
Hahah knew it was going to break, I just was curious how much.. Chassis, driveshafts, spur gear but thats it! :) It will live to launch again!
Well lets get on it then with some proof about the people who use the MMM and their numbers
6S 5250mha MA in series
1st ESC and 2200kv combo
10+ cycles through batteries
have u made holes in the OD of the tire to allow for drainage? I make mine with a soldering iron so it cauterizes the edges. what does the tire feel like when squeezed?
make sure to get some action shots of this happening and some of your neighbor rebuilding :lol:
wholly macro! axial makes something like that as well..
Hahah ya, but I have 96 little screws deterring me from that... :wacko:
Total broken parts
3 x driveshafts
3 x yokes
1 x rear bulkhead
1 x wing and mount
1 x front body mount
1 x rear body mount
Off topic but a frickin' awesome price!
http://www.greathobbies.com/productinfo/?prod_id=TRX5608 price is in...
one more broken bulkhead.. sigh..