Type: Posts; User: Russe77
What am I doing wrong I've watched the video half a dozen times but I can't get the QR-1 to go into calibratin mode. Currently trims are all the way out to 25 and still won't really hover. Help
Thanks guys. I miss spoke, it is a 13t pinion and 52t spur. I made the mistake of going smaller when I stripped the stock one. My bad. Time to find a big spur.
Have I mentioned recently how much I love my Slash. This thing is amazing! Tough like no other. I bought my youngest an RC18t2 for his birthday in November. He lives with his mother and never really...
So I need to drop my pinion? I've already put a smaller spur on (48 I think). 3S in 100 deg is still too much.
So it looks like there is a class forming for these (GT8 lite) and HPI is rumored to be getting in on the fun. I'll take a Shash w/ velineon any day over a Blitz but competition is good
Great race Cesar! If Steve can keep 3s cool, he'll kill em'. I am hoping that conversion brings some life to our racing scene.
When I look at this thread it shows 43 replies (44 posts) so this should be #45 but if I look at the indivual comments I only see #40. What gives? Am I miising some permission, account too new? Any...
I know $90 sounds a little steep but the wheel adapters alone were $45 at my hobbytown.
Then you can have one of these...
TeamSTRC had great success with their conversion last week racing in So Cal
Looks like a great product
As summer approaches and the temps rise what is everyone doing to keep things cool?
I've got the traxxas esc fan and an integy heat sync/fan on my motor but I don't think they are getting the job...
Isn't that going to be about track temp for you in August ;)
Can we get a 'Perky Jerky" #15 next.
The sway bars were a big help. Not enough people showed up in the heat today for a good race but I got in some good laps. Took some adjusting but I think the sway bars are set.
All Traxxas would have to do is mold up a few 1:10 Slash Fiesta's (and a Mustang) and a set of shock shafts that are 5-10 mm shorter and they would have a whole new vehicle. Price should be in line...
That is a 1:8 body on a 1:10 Slash 4x4. The wheel base on the slash is exactly the same as a majority of the 1:8 scale buggies (truggies are longer so I've been told maybe a Revo project...)
Where do I get the limiters? The fuel tube is not very precise.
Thanks for all the help and great information guys. I'd love to get this thing dialed in a little further. It has already shocked just about everyone who has driven it.
Is that the proline body? That may be the best one I've seen yet. Here is my Kyosho.
@Freelanceshots: Thanks for all the suggestions. The shocks are the pro-line dual rate (2 springs). They are fairly stiff with all the pre load and that is why I went with the 80 wt. The truck was...
Sway bars installed. Black may be too stiff. I run a fair amount of pre load and 80wt front and rear. I'll have to experiment.
My setup seems to work pretty well.
So I picked up a set but haven't really looked that them yet. DO they come front and rear in a pack? Do I need to purchase the different colors seperately?
You see me hit one of the parking blocks in the video and yes it scared the crap out of me. This being a slash though no damage.
As for the center diff, I haven't installed one yet. The 'car'...
The zip ties were mostly just to get the side height set properly. After I had it the way I wanted, I removed the shock shaft and put a short section of fuel tubing on to limit the travel. The zip...