Type: Posts; User: ntphongzodiac
After paint spray with 2 layer, All ok, not chipping & flaking off, hope can use few month
Here is image I take by phone at night :wacko:;):p...
Can I paint the Arms bySpray paint?
Any document for re-install & alignment servos? Pls send me the link or video?
My Erevo running to mud, very dirty, so I disassembly all for total maintenance, pls let me know "what I need to pay attention"? or some "note" during disassembly & assembly?
I also encounter same problem, but after adjust the toe link, right tie a bit toe out.
Image for you easy understand
Softcase as I know don't have hard case cover same as my post #36 above, only thin plastic cover for small dimension.
My charger Dynamite Passport Ultra AC/DC, I cannot find Storage Mode...
My batts thicker than battery bay (3S 5000mAh 25C), very hard to fit to battery bay, if you have image your batts fit to your truck, pls post to here for me easy to see? Thank you
The power cable &...
Here is balance cable (for 3S 5000mAh 25C) I do myself, pls check for me if I wrong, Red cable is Plus + & Black cable is Minus -. Pin number 4 is no connection.
This is Serial charging,
Hi all guys, finally my ERBE & Charger, Batts arrived to my home. Thank you for your advise, recommendation... here is some images: :)^_^
Here is my new ERBE and Phaltline Tire but cannot use Traxxas tool for tighten the crew to Hex hub.
You mean you running the car to 3.85v equal with discharge voltage right? So no need to discharge right?
Because as I understand: Discharge in order to put batts to 3.85v & keep in storage for long...
I searched on Ebay, only difference is body (IMO quite nice) & included Traxxas EZ-Peak charger, TQi on Snap-on model.
Many good info & video after seach youtube, easy understand. Thank you
Thank you, so for Beadlock, some tires & rims cannnot install beadlock right?
Your truck look stronger with these tires,...
I don't think they scrape off the chrome before glue. From this site, pls offer me which rim suitable for these tires? I dont know how to glue? and don't have experience to balance them. Althought I...
Can I use these tires & wheel for ERBE 5608?
Snap on model TQ or TQi transmition?
Pls see my question here, maybe will help you:
I saw the image on ebay, only body difference, I cannot found any difference, search on google also cannot found. So why is limited edition?
Anybody know How difference from ERBE & ERBE 5608 Snap-On Limited Edition?
I mean the link is Proline Road Rage 3.8 (40 Series), if need other model you can search on this web, I see some items here, price cheaper than Ebay.
Maybe here price abit cheaper: http://www.mammothhobbies.com/Proline-Road-Rage-3-8-40-Series-Street-Tru-p/pro117700.htm
Very nice tires, I'll considering to buy for on road.
So my Lipo will be: 5A*22.2V=111W right? Charger 100W so can not parallel charging this Lipo
So if using 2 Lipo 5800mAh 7.4V will be: 5.8A*14.8V=85.84W. Charger 100W so CAN parallel charging this...
Can I parallel charging 2 Lipo SPC 5000mAh 11.1v 25C at the same time on Dynamite Ultra Passport Charger? Because I don't know how to calculate Ohm & Amp?