Type: Posts; User: tyler_989
both but i do a lot of racing on small tracks and how hot can the motor get it get?
what size pinion should i use or start at for my slash ill be running 6 cell batteries.
ya my front diff is going and it makes the same noise if u hold the truck so the tires have some pressure on them and spin one of the tires and let a rear or front spin if its a ring or pinion it...
the large hex key is a 2.5mm and a 2mm and im not sure but the small hex key is a 1.5mm i use the stock 2 and 1.5 but i bought a large 2.5mm t handle hex which is really nice
i have a slash bumper on my rust and it is sweet i havent had a rpm one but the slash one is so long and angled that u can hit an almost vertical obstruction and bounce up over it all u have to...
i think it was advertised at 30+ from traxxas but that was without the small print
i use to have .15 in my t-maxx and upgraded everything to 3.3 except the
2.5r and tranny. get the 3.3 but u will probably have to upgrade to the 4908 tranny my 2.5r has broken parts in my tranny....
u guys could try dremeling a little bit off of the end of the screw on the pivot ball an 1/8" probably wouldn't hurt much
i use shrink wrap it keeps a real small diameter on the tube
good thats what im gonna get
has any one used the flash point temp guage from duratrax ive thought about getting a guage and that one seems to be a less expansive one.
is there any difference with the hexes in the wheels
u should get the traxxas upgraded brake disk and a more powerful throttle/brake servo. and make sure the screws that hold the brake disk to the trans housing are adjusted right
troutfisher what tires r those they kinda look like the traxxas ones
ok is rc alloys a good place to get drive shafts
i have a 2.5r with an original transmission and i was wondering if any one has used mip center axles.
what is the diff lock lube?
i just broke my front shock tower and i was wondering what would be the best replacement. i will probably get a rpm one because i think my lhs has them in stock. but would it be better to go for...
what is the difference in tire compounds. like the difference between m2 m3
ive been thinking about getting some tires for my rustler and i cant make a decision on which ones to get. right now i have a set of axial beadlocks with hpi geolanders on them but they are heavy and...
what is the part number for the whole part?
its got to be your idle screw
im pretty sure u can change the brushes
has any one used a team orion method r double wound 15t bb. iv been looking at orion motors for my rustler and the method seems like a good motor for the price. and im kinda wondering if the formula...
if you have reverse either your reverse or forward gear is stripped. get the exploded view off of traxxas.com, like a 5 dollar part. if you dont have reverse i would suggest take apart the tranny, if...