QR-1 Rotor flies off!
I have a rotor that will no longer stay on the QR 1. I push it down all the way then hold the QR 1 up to full speed for a 3 seconds and that blade will keep flying off.
I am new to the QR-1 ... The blade otherwise looks fine... any good trick to use this blade again? (I replaced it with the matching spare but now I have no replace for "A" in black.
Also is "A" in blue the same as "A" in black (other then colour)?
Yes the A in blue and the A in black are the same outside of color. All the color is for is so you know which way your are going.
I bought some blades for a HeliMaqx that are now doing that on my QR-1. The best fix is going to be replace the blade but until they are available I put a tiny and I do mean TINY dab of Shoe Goo on the very tip of the motor shaft then put the blade on . So far it seems to be working but I cant stress enough it has to be a tiny amount of Shoe Boo.